KAM-13D Hot-Wire 0.01

Details of KAM-13D Hot-Wire Anemometer: Hot-Wire 0.01

KAM-13D Hot-Wire Anemometer: Hot-Wire 0.01 is a hot-wire anemometer with a wind speed measurement range of 0.01~25.00 m/s and a display resolution of 0.01 m/s.

• The volume flow rate measurement mode can be set to two units: CMM and CFM
• Temperature measurement range is -20 ~ 50°C
• Humidity, Dew Point, Wet Bulb measurement modes are available
• Wind speed unit selection covers: m/s, ft/min, knots, km/hr, mph
• The probe has a high response to measurements even at low wind speeds, providing highly accurate results
• Data logging for maximum value, minimum value, and hold function is possible
• Data can be recorded up to 99 values
• The probe is small in size and can extend like an antenna (similar to a radio mast), suitable for narrow spaces or various air ducts, as well as high-altitude measurements
• The tip of the probe is flexible and can bend into any shape for convenient measurement in all conditions

Dimensions and Weight of KAM-13D Hot-Wire Anemometer: Hot-Wire 0.01

• Size: 156x73x35 mm
• Weight: 250 grams