KC-200N1 KEPLER Coating Thickness Gauge

Details of KEPLER Coating Thickness Gauge Model KC-200N1

KEPLER Coating Thickness Gauge Model KC-200N1 is an eddy current measuring instrument used to measure the thickness of non-magnetic coatings on metal. It offers two measurement units, Metric (µm) and Imperial (mil), with a wide measurement range of 0~1,250 µm and a resolution of 0.1 µm. The device can perform both continuous and single-point measurements, storing up to 1,000 values. Additionally, it supports data transfer to the Data Pro program via USB port (Optional) for data collection purposes. The probe is detachable from the main unit, allowing for precise measurement of small parts or narrow areas. It is suitable for measuring coating thickness on items such as transformers, nuts, screws, etc.

Technical Information KEPLER Coating Thickness Gauge Model KC-200F1

• Measuring range 0~1250µm, depends on probes. maximum 10mm for the probe F10
• Resolution 0.1µm
• Accuracy ±(3%H+1) µm
• Display 4 digital LCD with EL backlight
• Storage Memory for up to 20 files (up to 50 values for each file) of stored values
• Unit Metric (µm) / Imperial (mil)
• Working voltage Two AA size, 1.5 Volt alkaline batteries
• Working hours 200 hours typical operating time (EL backlight off)
• Communication port USB1.1
• Working temperature -10~+50°C
• Relative humidity ≤90%
• Included Accessories Main unit, F1 Probe (KC-200F1), N1 Probe (KC-200N1), Substrate, Calibration foil, ABS instrument case, Certificate, Instruction manual, AA size alkaline battery
• Optional Accessories Ferrous Probe F1/90° , Ferrous Probe F10, Ferrous Probe F400, USB cable and Datapro software