KC-2603FN KEPLER Coating Thickness Gauge

Details of KC-2603FN KEPLER Coating Thickness Gauge

The KC-2603FN KEPLER Coating Thickness Gauge comes with the ability to measure coating thickness in 2 IN 1 modes, namely Ferrous and Non-Ferrous, along with Zero and Two-point calibration capabilities. It also features a large data memory that can store numerous measurement values.

• Measures coating thickness in 2 IN 1 mode: Ferrous & Non-Ferrous
• The probe is detachable from the main unit, allowing for use in limited spaces and high durability (KC-2603FN)
• Measurement range: 0~1250 um
• Zero and Two-point calibration capabilities
• Auto Probe function automatically selects the appropriate probe based on the characteristics of the workpiece being measured
• Can measure both single readings and continuous measurements
• Displays statistical values for 5 parameters: average, maximum, minimum, standard deviation, number of measurements
• Large memory can store up to 500 measurement values
• Setting Hi-Alarm and Low-Alarm limits is possible
• RS232 port available for connecting the KP-230 printer to print measurement results (additional order)
• Used for measuring coating thickness of transformers, nuts, power poles, etc.

Tech Specifications KC-2603FN KEPLER Coating Thickness Gauge

• Probe types : N
• Working principle : Eddy current
• Measuring range : 0~1250um, 0~40µm (for chrome plate on copper)
• Minimum resolution : 0.1µm
• Zero point calibration : ±(3%H+1) µm / H means the thickness of tested piece
• Two points calibration : ±[(1~3)%H+1] µm / H means the thickness of tested piece
• Minimum curvature radius : Convexity 3mm
• Minimum area diameter : Ø5mm
• Critical base thickness : 0.3 mm
• Operating environment : Temp. 0~40°C / Humidity 20~90%RH (No strong magnetic field)
• Power : 2 pcs AAA 1.5 V battery
• Included Accessories : Main unit, Substrate F, Substrate N, Calibration foil, AAA 1.5V battery, Certificate, Warranty card, Instruction manual
• Optional Accessories : Dataview, Connecting cable