Toggle Nav
My Cart 0

SUP-PSS200 SUSPENDED SOLIDS / TSS / MLSS METER SUPMEA

Price on request – please contact us
Out of stock
SKU
050986
Out of stock

The price for this item is not shown online yet.

Ask for a price on LINE

SUPMEA SCMA

SUP-PSS200, SUPMEA, Suspended Solids Meter, TSS Meter, MLSS Meter, Suspended Solids Controller, Online TSS Meter, Online MLSS Meter, Sludge Concentration Meter, Total Suspended Solids Analyzer, Mixed Liquor Suspended Solids Analyzer, SS TSS MLSS Measurement, Water Quality Analyzer, Wastewater Monitoring, Activated Sludge Monitoring, Infrared Absorption, Dual Scattering Method, ISO 7027, 128x64 LCD Display, LED Backlight, Three 4-20mA Outputs, 3 Relay Outputs, RS485, Modbus Communication, IP65, NEMA4X, 220VAC, 24VDC, Self Cleaning System Compatible, SUP-PSS-9011 Sensor, Wastewater Treatment, Industrial Water Monitoring, Suspended Solids Meter, Suspended Solids in Water Meter, TSS Meter, MLSS Meter, Sludge Concentration Meter, Sewage Sludge Meter, Online TSS Meter, Continuous TSS Measurement, MLSS Meter for Wastewater Treatment System, SUPMEA Suspended Solids Meter, SUP-PSS200 Suspended Solids Meter, Industrial Water Quality Analyzer, Suspended Solids Meter with RS485, 4-20mA Suspended Solids Meter, Sewage Treatment System Monitoring Device

*Price does not include VAT

SUPMEA SUP-PSS200 Suspended Solids / TSS / MLSS Meter

SUPMEA SUP-PSS200 Suspended Solids / TSS / MLSS Meter is an online suspended solids analyzer for measuring and displaying the amount of suspended solids in water. It is used to monitor the concentration of suspended solids and sludge in wastewater treatment systems, working with the infrared absorption and scattering measurement principle-based SUP-PSS-9011 Series sensors.

The system supports Suspended Solids (SS), Total Suspended Solids (TSS), and Mixed Liquor Suspended Solids (MLSS) measurements. It is suitable for checking the operational status of wastewater treatment systems, especially activated sludge systems and processes that require control over suspended solid concentrations in water.

The SUP-PSS200 controller comes with a 128 x 64 pixel Dot Matrix LCD display and LED backlighting, along with three analog output channels (4-20 mA), three configurable relay outputs, and RS485 Modbus communication for connecting to PLCs, HMIs, SCADA systems, or online water quality monitoring systems.

The unit has an IP65 / NEMA 4X dust and water protection rating. It is available with either AC 220V or DC 24V power supply options as per product specifications. It can be used in conjunction with compatible sensors and automatic cleaning units according to system design.

General Features

  • Brand: SUPMEA
  • Model: SUP-PSS200
  • Type: Suspended Solids / TSS / MLSS Meter
  • Designed for online measurement of suspended solids and sludge concentration
  • Works with the SUP-PSS-9011 Series sensors
  • Sensor principle: Infrared Absorption & Dual-Scattering
  • Metering method based on ISO 7027 light-based measurement principles
  • Tech to reduce water color impact on measurements as per manufacturer specifications
  • Supports continuous monitoring (Continuous Monitoring)
  • Compatible with automatic sensor cleaning systems
  • LCD Dot Matrix display, 128 x 64 pixels, LED Backlight included
  • Three configurable analog output channels (4-20 mA) for parameter and signal range settings
  • Three relay outputs for parameter and setpoint configuration
  • Supports RS485 Modbus communication
  • Status monitoring system functions as per manufacturer data
  • Housing with IP65 / NEMA 4X protection rating
  • Suitable for wastewater treatment systems and industrial water quality control systems
  • Controller Specifications

    Specifications Details
    BrandSUPMEA
    ModelSUP-PSS200
    Product TypeOnline Suspended Solids Controller
    Measured ParametersSS / TSS / MLSS (Depending on Sensor and Configuration)
    Compatible Sensor SeriesSUP-PSS-9011 Series
    DisplayLCD Dot Matrix with LED Backlight
    Display Resolution128 x 64 Pixels
    Analog Output3 Channels, 4-20 mA
    Analog Output ConfigurationProgrammable Parameters and Output Ranges
    Maximum Analog Output Load500 Ohms
    Relay Output3 Configurable Relays
    Digital CommunicationRS485 Modbus
    Power Supply (AC Version)220 VAC, 50 Hz
    Power Supply (DC Version)24 VDC
    Power Consumption (AC)5 W
    Operating Temperature-15 to +60°C
    Storage Temperature-20 to +70°C
    Housing - Lower CasingPowder-Coated Aluminum
    Housing - CoverPA66 + GF25 + FR
    Ingress ProtectionIP65 / NEMA 4X
    Dimensions (L x W x H)145 x 125 x 162 mm
    WeightApproximately 1.3 kg
    Self-CleaningCompatible with Supported External Cleaning System

    (SUP-PSS-9011 Series Sensor Specifications) Technical Data of Compatible Sensors

    The SUP-PSS-9011 Series sensor is a measurement device used in conjunction with the SUP-PSS200 controller, requiring selection of measurement range, material, and probe style to match actual process requirements.

    Specifications Details
    Sensor SeriesSUP-PSS-9011 Series
    Measurement PrincipleInfrared Absorption and Dual-Scattering Method
    Reference StandardISO 7027 Optical Measurement Principle
    Measurement Range Option 10.01-20,000 mg/L
    Measurement Range Option 20.01-45,000 mg/L
    Measurement Range Option 30.01-120,000 mg/L
    Measurement AccuracyRefer to Sensor Datasheet and Sludge Conditions
    Sensor Diameter60 mm
    Sensor Length256 mm
    WeightApproximately 1.65 kg
    Main Body MaterialSUS316L (Standard Version)
    Seawater Version MaterialTitanium Alloy
    Upper / Lower CoverPVC
    Cable MaterialPVC
    Sensor ProtectionIP68 / NEMA 6P
    Maximum Pressure0.4 MPa
    Maximum Flow Velocity2.5 m/s
    Operating Environment Temperature0 to +45°C
    Storage Temperature-15 to +65°C
    CalibrationSample Calibration / Slope Calibration
    Standard Cable Length10 m
    Maximum Cable Length100 m (Subject to Manufacturer Conditions)
    Cleaning SystemOptional / Depending on Configuration

    How the Suspended Solids Meter Works

    The SUP-PSS200 system works in conjunction with a probe that uses Infrared Absorption & Dual-Scattering principles, sending infrared light to water samples and detecting scattering or absorption caused by suspended particles. The signal is then processed to display the concentration of suspended solids.

    Infrared measurement technology helps reduce the impact of sample color on readings compared to some optical methods. However, the accuracy of measurements still depends on particle properties such as size, shape, concentration, and sediment composition.

    Using these values to replace gravimetric suspended solid measurements in a laboratory should be verified with actual samples and calibration according to process conditions.

    Meter Parameters

    Suspended Solids (SS)

    This is used to monitor the concentration of suspended solids in water for assessing changes within water production or wastewater treatment systems.

    Total Suspended Solids (TSS)

    Used to check the total solid suspension concentration in water, suitable for monitoring water quality and sediment separation efficiency during wastewater treatment processes. Calibration is required according to the type of sediment being measured.

    Mixed Liquor Suspended Solids (MLSS)

    This measures the suspended solids concentration in mixed liquor within activated sludge wastewater treatment systems to assist with biological system assessment and control.

    4-20 mA Output System

    The SUP-PSS200 has 3 analog output channels of 4-20 mA, which can be set according to the device's capabilities for connecting to PLCs, Data Loggers, or current signal-supported control systems.

    The catalog specifies a maximum load of 500 Ohms for analog signals. Before connecting the system, it is important to check wiring patterns and signal scaling settings from the manual.

    RS485 Modbus Communication System

    The device supports RS485 Modbus communication for sending measurement values to PLCs, HMIs, or SCADA systems, allowing real-time monitoring of suspended solid concentration changes from a control center.

    Before connecting the system, it is necessary to verify the Modbus Address, Baud Rate, Parity, Register Map, and pinout diagram according to the specific model manual for accurate communication.

    Relay and Automatic Cleaning System

    SUP-PSS200 has three relay channels that can be parameterized and set to work points, which can be applied to alert systems and control devices as supported by the manufacturer.

    The measurement system can be used in conjunction with an automatic probe cleaning device to reduce sediment and dirt accumulation on the measuring surface, which is a critical factor for reliable continuous measurement.

    The cleaning kit is an accessory that must be checked for compatibility before ordering; it should not be considered part of the standard Controller package.

    Installation and Setup

    • Ensure that the controller and selected probe are compatible.
    • Select a measuring range suitable for the expected suspended solids concentration.
    • Check that the probe material is appropriate for the sample substance and process conditions.
    • Install the probe in a position representative of the water or sediment to be measured.
    • Avoid areas with excessive air bubbles, abnormal sediment accumulation, or unsuitable flow patterns.
    • Mount the controller in an area suitable for IP65 protection level.
    • Select AC or DC power supply version according to the installed system.
    • Connect probe wires and signals as per manufacturer's manual.
    • Set measurement range and calibrate with process samples.
    • Configure 4-20 mA output and RS485 communication for compatibility with the target system.
    • Test relay operation and alert systems.
    • Define inspection, cleaning, and calibration cycles based on usage conditions.

    Examples and Usage Guidelines

    • Monitor TSS levels in industrial wastewater treatment systems.
    • Measure MLSS concentration in aeration tanks of activated sludge systems.
    • Track sediment concentration in wastewater treatment processes.
    • Use for monitoring the efficiency of sediment separation.
    • Check changes in suspended solids in water production systems.
    • Connect measurement values to PLC and SCADA systems.
    • Utilize for monitoring sediment concentration and process data logging.
    • Apply in industrial plant water quality control systems.

    Considerations

    • SUP-PSS200 is a controller and display unit, while the SUP-PSS-9011 Series probe is a measuring device that requires shipment item verification.
    • The measurement ranges of 20,000 / 45,000 / 120,000 mg/L are probe options and not necessarily supported simultaneously by all probes.
  • The IP65 rating of the controller is different from the IP68 rating of the probe
  • Calibration should be done with actual samples to ensure that the displayed values correlate with the type and properties of the sediment in the process
  • The power supply version must match the unit label and order documentation
  • An automatic cleaning system may require additional accessory kits
  • Before connecting to a PLC, check the Register Map, 4-20 mA scaling, and relay positions from the manufacturer's manual
  • Meter head material selection and pressure, temperature, and flow rate limitations must be verified
  • The accompanying equipment, sensor cables, mounting kits, and calibration documentation should be reviewed before ordering
  • Write Your Own Review
    You're reviewing:SUP-PSS200 SUSPENDED SOLIDS / TSS / MLSS METER SUPMEA
    Cookie settings
    🤖 AI Assistant
    Ask about products, specs and replacement models
    Hello 👋 Ask us anything — find products, compare specs, or troubleshoot.
    🗑 Clear history