Details of SGP-200W-12 SANGI Switching Power Supply
The SGP-200W-12 from SANGI is a switching power supply in the SGP-200W Series, supporting input voltage 176–264VAC and providing output of 12VDC at 16.7A current. It can adjust the output voltage by ±10% of the rated voltage to suit connected DC electrical equipment.
It features an internal EMI Filter, with Ripple & Noise at 120mV and efficiency at 80%, along with overload and short circuit protection systems. Heat dissipation is achieved through natural air convection. The unit size is 199 × 110 × 50 mm, suitable for use as a power source in control systems and DC 12V equipment.
Key Features
Output of 12VDC at 16.7A current
Supports input voltage 176–264VAC, frequency 47–63Hz
Adjustable output voltage by ±10% of the rated voltage
Included internal EMI Filter and Ripple & Noise at 120mV
Overload and short circuit protection systems
Natural air convection cooling without fans
Tech Specifications
Brand: SANGI
Model: SGP-200W-12
Series: SGP-200W Series
Type: Switching Power Supply
Input Voltage: 176–264VAC
Input Frequency: 47–63Hz
Output Voltage: 12VDC
Output Current: 16.7A
Voltage Adjustment Range: ±10% of the rated voltage
Loading Regulation: 1%
Line Regulation at Full Load: ≤0.5%
Ripple & Noise: 120mV
Efficiency: 80%
Inrush Current at Start-up: Cold Start 60A at 230VAC
Overload Protection: Cuts output at 110–150%, requires AC power off and on to restart
Rise Time / Hold-up Time: 50ms / 20ms at full load, typical values
Insulation Voltage Withstand: I/P–O/P and I/P–FG 1500VAC; O/P–FG 500VAC for one minute
Operating Temperature: -10 to 40°C at 100% load; at 60°C, use 60% load
Storage Temperature: -20 to 85°C
Storage Humidity: 20–95%RH, no condensation
Cooling Method: Free Air Cooling Convection
Safety Standards: GB4943, UL60950-1, EN60950-1
EMC Standards: GB9254, EN55022 Class A
Dimensions: 199 × 110 × 50 mm
Usage
Power supply for suitable DC equipment and circuits at 12V
Suitable as a power source in control cabinets, machinery, and electronic systems
Adjust output voltage to suit the load before connecting for use
Install with air circulation and reduce load when used in high temperatures
We use cookies to make the site work properly, to understand how it is used, and to show content that is relevant to you. You choose which types to allow; strictly necessary cookies are always on. Privacy Policy