Toggle Nav
My Cart 0

SG-VB-4T315G/355P Inverter SANGI ELECTRIC

Price on request – please contact us
Out of stock
SKU
051062
Out of stock

The price for this item is not shown online yet.

Ask for a price on LINE

SANGI ELECTRIC SCMA

SANGI ELECTRIC SG-VB-4T315G/355P, SG-VB-4T315G/355P Inverter, SANGI SG-VB Series, Industrial Inverter, Variable Frequency Drive, VFD, AC Motor Drive, Three Phase Motor Inverter, Three Phase 380VAC Inverter, 315kW G Type Inverter, 355kW P Type Inverter, 315kW 355kW VFD, Heavy Duty Inverter, Normal Duty Inverter, High Power Inverter, Variable Speed Drive, V/F Control, Torque Control, RS485 Modbus Inverter, Industrial Motor Speed Control, Three Phase AC Motor Control, Industrial Automation Drive, Pump Inverter, Fan Inverter, HVAC Motor Drive, AHU Inverter, Conveyor Drive, Industrial Motor Controller, Factory Automation, Process Control, SANGI ELECTRIC Inverter Thailand, Inverter SANGI ELECTRIC, SG-VB Inverter, 3-Phase Inverter, 380VAC Inverter, 315kW Inverter, 355kW Inverter, High Power Inverter, Variable Speed Motor Control Inverter, V/F Control Inverter, Pump Inverter, Fan Inverter, Conveyor Drive Inverter, Industrial Motor Controller, RS485 Modbus Inverter, Automated Motor Control System, SANGI SG-VB-4T315G/355P Thailand

*Price does not include VAT

SANGI ELECTRIC Inverter Model SG-VB-4T315G/355P (Industrial Variable Frequency Drive)

SANGI ELECTRIC SG-VB-4T315G/355P is an inverter or Variable Frequency Drive (VFD) from the SG-VB Series designed to control the speed of three-phase AC motors by adjusting the output frequency and voltage to match motor and industrial machinery requirements.

The model code SG-VB-4T315G/355P corresponds to the base model VB-4T315G/355P, which specifies a motor rating of 315 kW for G Type and 355 kW for P Type. Specific power and current ratings must be verified against the Nameplate or Datasheet provided by SANGI ELECTRIC before actual use.

According to SCMA General Catalog Vol.5, the SG-VB Series inverter supports V/F Control and Torque Control with RS485 Modbus communication for connecting to PLCs, HMIs, and external control systems that support it.

Suitable for large water pump systems, industrial fans, AHU systems, conveyor belts, and machinery requiring high-power motor speed control. Consider the rated current and load characteristics before selecting this product.

General Features (Features)

  • Brand: SANGI ELECTRIC
  • Model: SG-VB-4T315G/355P
  • Series: SG-VB Series
  • Type: Industrial Inverter / Variable Frequency Drive
  • For controlling three-phase AC motors
  • Rated power 315 kW for G Type
  • Rated power 355 kW for P Type
  • Suitable for 3 Phase 380 VAC electrical systems as per SG-VB Series data
  • Supports V/F Control
  • Supports Torque Control
  • Supports RS485 Modbus communication
  • Supports Digital Input and Analog Input connections according to SG-VB Series information
  • Able to handle overloading within the rated G Type and P Type limits
  • Suitable for Factory Automation and Industrial Motor Control systems

Technical Specifications (Technical Specifications)

Specifications Details
BrandSANGI ELECTRIC
ModelSG-VB-4T315G/355P
SeriesSG-VB
Product TypeIndustrial Inverter / VFD
Motor TypeThree-Phase AC Motor
G Type Motor Power315 kW (Matching VB Series Reference)
P Type Motor Power355 kW (Matching VB Series Reference)
Power Capacity G/P445 / 500 kVA (Matching VB Series Reference)
Input Phase3 Phase
Nominal Input Voltage380 VAC (SG-VB Series)
Input Voltage Tolerance±15% (SG-VB Series)
Input Frequency50/60 Hz ±15% (SG-VB Series)
Rated Input Current G/P590 / 665 A (Matching VB Series Reference)
Output Voltage3 Phase 0-380 VAC (SG-VB Series)
Rated Output Current G/P585 / 650 A (Matching VB Series Reference)
Control MethodV/F Control / Torque Control
V/F Output Frequency0-1000 Hz (SG-VB Series)
SVC Output Frequency0-320 Hz (SG-VB Series)
G Type Starting Torque150% at 0.5 Hz (SVC, SG-VB Series)
P Type Starting Torque100% at 0.5 Hz (SG-VB Series)
G Type Overload Capacity150% for 60 s / 180% for 1 s
P Type Overload Capacity120% for 60 s / 150% for 1 s
Digital Inputs6 Channels, NPN (SG-VB Series)
Analog Inputs2 Channels, 0-10 V / 4-20 mA (SG-VB Series)
Digital OutputsRelay Contact NO/NC and 1 NPN Output (SG-VB Series)
Analog Output1 Channel, 0-10 V / 4-20 mA (SG-VB Series)
CommunicationRS485 Modbus
Protection ClassIP20 (Matching VB Series Reference)
Reference Dimensions (H x W x D)1800 x 945 x 620 mm (Matching VB Series Reference)
Reference Weight246 kg (Matching VB Series Reference)
Integrated Braking FunctionNo (Matching VB Series Reference)
Exact SANGI Nameplate RatingsTo Be Confirmed Before Ordering
Catalog ReferenceSCMA General Catalog Vol.5, D4-01 to D4-04

Note on Data: Electrical specifications, control functions, signal channels and communication refer to SG-VB Series from SCMA catalog. Power 315/355 kW, current 590/665 A and 585/650 A as well as dimensions and weight reference VB-4T315G/355P with matching codes but must be confirmed by SANGI ELECTRIC before being used as official product specifications.

Motor Speed Control

The SG-VB Series inverter controls the speed of three-phase AC electric motors by adjusting the frequency and voltage supplied to the motor according to system requirements, enabling precise control over machinery operation for production processes.

For water pump and fan systems with variable torque load characteristics, controlling the speed based on actual workload may help reduce energy consumption, depending on system design and usage patterns.

G Type and P Type Power Ratings

The base model VB-4T315G/355P with matching codes has power ratings of 315 kW for G Type and 355 kW for P Type, with differing current values and overload capacity.

RatingG TypeP Type
Motor Power315 kW355 kW
Power Capacity445 kVA500 kVA
Reference Input Current590 A665 A
Reference Output Current585 A650 A
Overload Capacity (60 s)150%120% Overload Capacity (1 s)180%150%

G Type is suitable for consideration with loads that require high overload capacity, while P Type is suitable for loads that match the power and current ratings, such as properly designed fan or pump systems.

The motor current, starting torque, acceleration time, deceleration time, and Duty Cycle must be checked before selecting a model. Do not select based on kW rating alone.

V/F Control

SG-VB Series supports V/F control to adjust the relationship between voltage and frequency supplied to the motor for speed control according to system commands.

The settings must refer to the motor nameplate data such as Rated Voltage, Rated Current, Rated Frequency, and Rated Speed before use.

Torque Control

SG-VB Series supports Torque Control for application in systems requiring torque control based on machine operation characteristics. The setup method and limitations should be checked from the manufacturer's manual.

RS485 Modbus Communication

The SG-VB Series inverters support RS485 Modbus communication to connect with PLC, HMI or external control systems that support the same protocol.

Baud Rate, Device Address, Register Map, Data Format and RS485 wiring method should be checked from the actual model manual for correct and appropriate communication in the factory environment.

Digital Input and Analog Input

According to SG-VB Series data, there are 6 NPN type Digital Inputs and 2 Analog Inputs supporting 0-10 V or 4-20 mA signals for connection with external control devices.

The Terminal Assignment and electrical ratings of each channel must be checked before connecting the actual circuit.

Digital Output and Analog Output

SG-VB Series provides outputs to send status and data signals to external control devices, including Relay Contact, NPN Digital Output, and Analog Output as per catalog information.

The signal type, current rating, and configurable functions of each terminal should be checked from the manufacturer's manual before connecting.

Overload Capability

Operating Type60 Seconds1 Second
G Type150% Rated Current180% Rated Current
P Type120% Rated Current150% Rated Current

Overshoot load values are general information for SG-VB Series. Operating conditions, run time, ambient temperature and additional power derating must be verified.

Dimensions and Installation (Reference Dimensions)

The reference model VB-4T315G/355P has dimensions of 1800 x 945 x 620 mm (H x W x D) and weighs 246 kg, which is not yet confirmed as the final size and weight for SANGI ELECTRIC SG-VB-4T315G/355P.

Installation must allow space for cooling, power wiring, accessory installation, and maintenance access according to the manufacturer's manual.

Braking System and Accessories

For high-power inverters, it is necessary to check the requirement for an External Braking Unit and a Braking Resistor based on load characteristics, especially in applications requiring rapid stopping or deceleration.

The reference model VB-4T315G/355P specifies that there is no Integrated Braking Function. However, the actual SANGI ELECTRIC braking circuit configuration must be confirmed from the manufacturer's manual before selecting accessories.

Direct connection of a Braking Resistor to the DC Bus should not be made without documentation specifying support for it, and wiring diagrams must be reviewed prior to installation.

Application Examples

  • Three-phase motor speed control systems
  • High-capacity water pump systems in industrial plants
  • Industrial fan and ventilation systems
  • AHU and industrial air conditioning systems
  • Belt conveyor systems with suitable load ratings
  • Control of high-power machinery
  • Inverter control through PLC or HMI
  • Factory Automation and Process Control Systems

Selecting SG-VB-4T315G/355P Guidelines

  • Check the model number and power rating from the SANGI ELECTRIC nameplate.
  • Verify motor power of 315 kW or 355 kW based on load type.
  • Confirm voltage and phase count of electrical system.
  • Compare motor current with inverter output current.
  • Select G Type or P Type according to the requirement for overload capacity.
  • Check torque during startup and acceleration time
  • Check RS485 Modbus connection
  • Check size and installation area
  • Check cooling system and protective devices
  • Review Datasheet and Wiring Diagram before purchase
  • Installation Precautions

    • Hire personnel with knowledge of electrical systems for installation and inspection
    • Verify number of phases and voltage before energizing the unit
    • Select wire size and protective devices according to actual current rating
    • Connect grounding wires as per manufacturer's specifications and relevant standards
    • Provide adequate cooling space suitable for high-power inverters
    • Separate motor power cables from signal and communication lines
    • Check motor wiring at terminals U, V, and W according to Wiring Diagram
    • Set motor parameters before running the unit
    • Evaluate the necessity of an External Braking Unit
    • Design Emergency Stop and Safety systems appropriate for machine risk level
    • De-energize, lock out power source, and verify that DC Bus has no voltage before maintenance

    Important Notes

    • The product is a SANGI ELECTRIC inverter model SG-VB-4T315G/355P
    • Belonging to the SG-VB Series
    • Powers of 315/355 kW are reference data from VB-4T315G/355P
    • Supports V/F Control and Torque Control according to SG-VB Series information
    • Supports RS485 Modbus
    • Incoming current 590/665 A and outgoing current 585/650 A are data from comparable VB models
    • Dimensions and weight for the SANGI ELECTRIC model must be confirmed from Datasheet
    • Nameplate and Datasheet must be reviewed before using as product specifications
    • Motor compatibility and accessory suitability must be verified before installation
    Write Your Own Review
    You're reviewing:SG-VB-4T315G/355P Inverter SANGI ELECTRIC
    Cookie settings
    🤖 AI Assistant
    Ask about products, specs and replacement models
    Hello 👋 Ask us anything — find products, compare specs, or troubleshoot.
    🗑 Clear history