SANGI ELECTRIC Inverter Model SG-VB-4T200G/220P (Industrial Variable Frequency Drive)
SANGI ELECTRIC SG-VB-4T200G/220P is an inverter or Variable Frequency Drive (VFD) from the SG-VB Series designed to control the speed of three-phase AC motors by adjusting the output frequency and voltage to match the motor's operational characteristics and industrial machinery requirements.
The model code SG-VB-4T200G/220P corresponds to the base model VB-4T200G/220P, which has a rated power of 200 kW for G Type and 220 kW for P Type. It is suitable for consideration in high-power motor drive systems, but actual selection should be based on verifying the power and current ratings from the SANGI ELECTRIC product nameplate.
According to SCMA General Catalog Vol.5, the SG-VB Series inverters support V/F Control and Torque Control, along with RS485 Modbus communication for connecting to PLCs, HMIs, and other compatible control devices.
This inverter can be applied in water pump systems, industrial fans, AHU systems, conveyor belts, and machinery requiring motor speed adjustment according to production processes. Proper selection should match the load characteristics and actual operating conditions.
General Features (Features)
- Brand: SANGI ELECTRIC
- Model: SG-VB-4T200G/220P
- Series: SG-VB Series
- Type: Industrial Inverter / Variable Frequency Drive
- For three-phase AC motors
- Rated power 200 kW for G Type
- Rated power 220 kW for P Type
- Electrical system: 3 Phase 380 VAC as per SG-VB Series specifications
- Supports V/F Control
- Supports Torque Control
- Supports RS485 Modbus Communication
- Suitable for connecting digital and analog input signals
- Capable of handling overloads according to G Type and P Type ratings
- Adequate for motor speed control in industrial plants
Technical Specifications (Technical Specifications)
| Specifications | Details |
| Brand | SANGI ELECTRIC |
| Model | SG-VB-4T200G/220P |
| Series | SG-VB |
| Product Type | Industrial Inverter / VFD |
| Motor Type | Three-Phase AC Motor |
| G Type Motor Power | 200 kW (Matching VB Series Reference) |
| P Type Motor Power | 220 kW (Matching VB Series Reference) |
| Power Capacity G/P | 260 / 280 kVA (Matching VB Series Reference) |
| Input Phase | 3 Phase |
| Nominal Input Voltage | 380 VAC (SG-VB Series) |
| Input Voltage Tolerance | ±15% (SG-VB Series) |
| Input Frequency | 50/60 Hz ±15% (SG-VB Series) |
| Rated Input Current G/P | 385 / 430 A (Matching VB Series Reference) |
| Output Voltage | 3 Phase 0-380 VAC (SG-VB Series) |
| Rated Output Current G/P | 377 / 426 A (Matching VB Series Reference) |
| Control Method | V/F Control / Torque Control |
| V/F Output Frequency | 0-1000 Hz (SG-VB Series) |
| SVC Output Frequency | 0-320 Hz (SG-VB Series) |
| G Type Starting Torque | 150% at 0.5 Hz (SVC, SG-VB Series) |
| P Type Starting Torque | 100% at 0.5 Hz (SG-VB Series) |
| G Type Overload Capacity | 150% for 60 s / 180% for 1 s |
| P Type Overload Capacity | 120% for 60 s / 150% for 1 s |
| Digital Inputs | 6 Channels, NPN (SG-VB Series) |
| Analog Inputs | 2 Channels, 0-10 V / 4-20 mA (SG-VB Series) |
| Digital Outputs | Relay Contact NO/NC and 1 NPN Output (SG-VB Series) |
| Analog Output | 1 Channel, 0-10 V / 4-20 mA (SG-VB Series) |
| Communication | RS485 Modbus |
| Protection Class | IP20 (Matching VB Series Reference) |
| Reference Dimensions (H x W x D) | 1570 x 600 x 408 mm (Matching VB Series Reference) |
| Reference Weight | 180 kg (Matching VB Series Reference) |
| Integrated Braking Function | No (Matching VB Series Reference) |
| Exact SANGI Nameplate Ratings | To Be Confirmed Before Ordering |
| Catalog Reference | SCMA General Catalog Vol.5, D4-01 to D4-04 |
Note on Data: Voltage specs, control system, signal channels and communication refer to SG-VB Series in SCMA catalog. Power ratings of 200/220 kW, currents of 385/430 A and 377/426 A as well as dimensions and weight reference VB-4T200G/220P with matching codes but still need to be confirmed from SANGI ELECTRIC datasheet or nameplate.
Motor Speed Control
The SG-VB Series inverter controls the speed of three-phase AC motors by adjusting the frequency and voltage supplied to the motor, allowing for setting speeds according to system machinery and production process requirements.
Adjusting speed appropriately based on workload may help reduce energy consumption in systems with suitable load characteristics, especially variable torque pump and fan systems. However, actual energy savings depend on control methods and real usage scenarios.
G Type and P Type Power Ratings
The basic model VB-4T200G/220P used for verification has power ratings of 200 kW for G Type and 220 kW for P Type, with differing current ratings and overload capacity.
| Rating | G Type | P Type |
| Motor Power | 200 kW | 220 kW |
| Power Capacity | 260 kVA | 280 kVA |
| Reference Input Current | 385 A | 430 A |
| Reference Output Current | 377 A | 426 A |
| Overload Capacity (60 s) | 150% | 120% |
| Overload Capacity (1 s) | 180% | 150% |
G Type is suitable for applications requiring high overload capacity, while P Type is suited for loads that match the power and current ratings, such as properly designed fan or pump systems.
Selecting an inverter requires checking the motor's rated current, starting torque, acceleration and deceleration time, duty cycle, and installation environment. It should not be chosen based on kW capacity alone.
V/F Control
The SG-VB Series supports V/F control to manage the relationship between voltage and frequency supplied to the motor for speed adjustment suitable for machinery systems.
Motor parameters such as Rated Voltage, Rated Current, Rated Frequency, and Rated Speed should be set according to the motor's nameplate information before use.
Torque Control
The SG-VB Series supports Torque Control for applications requiring torque control based on process characteristics. Operating conditions and setup procedures must be reviewed as per the manufacturer’s manual.
RS485 Modbus Communication
The SG-VB Series inverter supports RS485 Modbus communication to connect with PLC, HMI or external control systems that support the same protocol.
In designing a communication system, one should review the Modbus Register Map, Baud Rate, Device Address and data frame format from the manufacturer's manual. Proper wiring and noise protection must also be considered for the factory environment.
Digital Input and Analog Input
According to SG-VB Series specifications, there are 6 digital inputs (NPN type) and 2 analog inputs supporting standard signals of 0-10 V or 4-20 mA for external control device connections.
The input channels can be used in the design of a control system based on functions supported by the manufacturer. Terminal assignment and parameter values must be checked before actual use.
Digital Output and Analog Output
The SG-VB Series provides outputs to send status or signals to external control systems, including Relay Contact, NPN Digital Output, and Analog Output as per the catalog information.
Check the current rating of each channel and the output function assignment from the manual before connecting to a PLC or end device.
Overload Capability
| Operating Type | 60 Seconds | 1 Second |
| G Type | 150% Rated Current | 180% Rated Current |
| P Type | 120% Rated Current | 150% Rated Current |
The overload capability values are for the SG-VB Series and must be verified with operating conditions, ambient temperature, and additional power rating reductions when designing a real system.
Dimensions and Installation (Reference Dimensions)
The base model VB-4T200G/220P with matching codes has reference dimensions of 1570 x 600 x 408 mm (H x W x D) and weighs approximately 180 kg. This information is not yet confirmed as the final product dimensions for SANGI ELECTRIC.
The control cabinet design must account for cooling space, power wiring space, installation area of accessories, and access points for maintenance according to the manufacturer's manual.
Braking System and Accessories
For high-power inverters, consider using an External Braking Unit and a Braking Resistor that are suitable for the load characteristics, especially systems with rapid speed reduction or motor regeneration energy.
The base model VB-4T200G/220P specifies no Integrated Braking Function. Therefore, verify the braking system of SANGI ELECTRIC before selecting equipment and do not directly connect a brake resistor to the DC Bus without supporting documentation.
Applications
- Three-phase motor speed control systems
- High-power water pump systems in industrial plants
- Industrial fan and ventilation systems
- AHU and industrial air conditioning systems
- Belt conveyor systems with suitable load ratings
- High-power machinery control systems
- Inverter control through PLC or HMI
- Factory Automation and Process Control Systems
Selecting SG-VB-4T200G/220P Guidelines
- Check the model code and power rating from the SANGI ELECTRIC nameplate.
- Verify motor power of 200 kW or 220 kW according to usage patterns.
Check the input power supply voltage and number of phases
Verify motor current against inverter output current
Select G Type or P Type to suit load characteristics
Check starting torque and acceleration time
Check compatibility with RS485 Modbus
Inspect installation space and cooling system
Check necessary protective devices and braking systems
Review Datasheet and Wiring Diagram before ordering
Installation Precautions
- Hire qualified electrical personnel for installation and inspection
- Verify number of phases and voltage before energizing
- Select wiring and protective devices according to the actual rated current of the equipment
- Connect grounding wire as per manufacturer's specifications and relevant standards
- Adequately arrange cooling space suitable for high-power inverters
- Separate motor power cables from signal and communication wires
- Check motor wiring connections to terminals U, V, and W according to Wiring Diagram
- Set motor parameters correctly before running the system
- Evaluate necessity of External Braking Unit
- Design Emergency Stop and Safety systems appropriate for machinery risk level
- De-energize, lock out power source, and verify DC Bus voltage absence before maintenance
Important Notes
- This is a SANGI ELECTRIC inverter model SG-VB-4T200G/220P
- Belonging to the SG-VB Series family
- Power rating of 200/220 kW as per VB-4T200G/220P reference data
- Supports V/F Control and Torque Control according to SG-VB Series information
- Supports RS485 Modbus communication
- Input current of 385/430 A and output current of 377/426 A based on comparable VB model data
- Specific dimensions and weight for SANGI ELECTRIC models must be confirmed from Datasheet
- Necessary braking systems and compatible accessories must be verified before ordering
Must check the Nameplate and Datasheet of SANGI ELECTRIC before using them as confirmed specifications
