SANGI ELECTRIC Inverter SG-VB-4T075G/093P (Industrial Variable Frequency Drive)
SANGI ELECTRIC SG-VB-4T075G/093P is an inverter or Variable Frequency Drive (VFD) from the SG-VB series designed to control the speed of three-phase AC motors by adjusting the output frequency and voltage to match motor requirements.
The SG-VB-4T075G/093P model is intended for a 380 VAC, three-phase electrical system in the industrial inverter category. The power rating codes G/P according to the VB Series table specify 75 kW for G Type and 93 kW for P Type. However, it's important to confirm the exact power ratings from the product nameplate or datasheet provided by SANGI ELECTRIC before purchasing.
The SG-VB series inverter supports V/F Control and Torque Control along with RS485 Modbus communication for integration with PLCs, HMIs, and other industrial control devices that support this protocol.
General Features (Features)
- Brand: SANGI ELECTRIC
- Model: SG-VB-4T075G/093P
- Series: SG-VB Series
- Type: Industrial Inverter / Variable Frequency Drive
- For controlling three-phase AC motors
- Power rating according to basic model code VB Series: 75 kW for G Type
- Power rating according to basic model code VB Series: 93 kW for P Type
- Electrical system: Three Phase 380 VAC as per SG-VB Series specifications
- Supports V/F Control
- Supports Torque Control
- Supports RS485 Modbus communication
- Fits well for motor speed control systems in industrial plants
- Applicable to water pump, AHU fan and conveyor belt systems
Technical Specifications (Technical Specifications)
| Specifications |
Details |
| Brand | SANGI ELECTRIC |
| Model | SG-VB-4T075G/093P |
| Series | SG-VB |
| Product Type | Variable Frequency Drive / Inverter |
| Motor Type | Three-Phase AC Motor |
| G Type Power Rating | 75 kW (Based on Matching VB Series Model) |
| P Type Power Rating | 93 kW (Based on Matching VB Series Model) |
| Input Phase | 3 Phase |
| Nominal Input Voltage | 380 VAC |
| Input Voltage Tolerance | ±15% (SG-VB Series) |
| Input Frequency | 50/60 Hz ±15% (SG-VB Series) |
| Input Current G / P | 157 A / 180 A (Matching VB Series Reference; Verify with SANGI Datasheet) |
| Output Voltage | 3 Phase, 0-380 VAC (SG-VB Series) |
| Output Current G / P | 150 A / 170 A (Matching VB Series Reference; Verify with SANGI Datasheet) |
| Control Method | V/F Control / Torque Control |
| V/F Output Frequency | 0-1000 Hz (SG-VB Series) |
| SVC Output Frequency | 0-320 Hz (SG-VB Series) |
| G Type Starting Torque | 150% at 0.5 Hz (SVC, SG-VB Series) |
| P Type Starting Torque | 100% at 0.5 Hz (SG-VB Series) |
| G Type Overload Capacity | 150% for 60 s / 180% for 1 s |
| P Type Overload Capacity | 120% for 60 s / 150% for 1 s |
| Digital Inputs | 6 Channels, NPN (SG-VB Series) |
| Analog Inputs | 2 Channels, 0-10 V / 4-20 mA (SG-VB Series) |
| Digital Output | Relay Contact NO/NC and NPN Output (SG-VB Series) |
| Analog Output | 0-10 V / 4-20 mA (SG-VB Series) |
| Communication | RS485 Modbus |
| Protection Class | IP20 (Matching VB Series Reference; Verify Exact Model) |
| Dimensions | To Be Confirmed from SANGI Model Datasheet |
| Weight | To Be Confirmed from SANGI Model Datasheet |
| Catalog Reference | SCMA General Catalog Vol.5, D4-01 to D4-04 |
Note on Data: The coordinates and general functions refer to the SG-VB Series in the SCMA catalog. The power data of 75/93 kW and current of 157/180 A, 150/170 A are referenced from the basic model VB-4T075G/093P from external sources. It must be verified that it matches with the SANGI ELECTRIC SG-VB-4T075G/093P before confirming the specifications for sale.
Motor Speed Control
The SG-VB Series inverter controls motor speed by adjusting output frequency and voltage to meet production process requirements.
It can be applied to machinery requiring variable speeds such as water pumps, fans, ventilation systems, and conveyor belts. The correct inverter rating must be selected based on the motor power, load current, and actual usage conditions.
G Type and P Type Power Ratings
The model code SG-VB-4T075G/093P indicates two types of power ratings according to the basic VB Series structure: G Type for applications requiring high overload capacity, and P Type for loads suitable for the P rating.
| Rating |
G Type |
P Type |
| Motor Power | 75 kW | 93 kW |
| Reference Output Current | 150 A | 170 A |
| Overload 60 s | 150% | 120% |
| Overload 1 s | 180% | 150% |
The power and current table is based on the matching VB Series model codes. The ratings should be confirmed from the product's nameplate and datasheet before selection.
V/F Control and Torque Control System
SG-VB Series supports V/F control for voltage-to-frequency adjustment, and torque control for applications requiring precise torque regulation according to system characteristics.
The choice of control mode must consider the motor type, load nature, required speed range, and appropriate parameter settings.
RS485 Modbus Communication System
The SG-VB Series inverter supports RS485 Modbus communication for connecting to external control systems such as PLC or HMI with compatible communication.
Usage requires checking the Modbus Address, Baud Rate, Register Map and communication wiring layout from the actual model user manual.
Digital and Analog Input Signal Reception
The SG-VB Series has 6 NPN type Digital Input channels and 2 Analog Input channels for receiving standard control signals of 0-10 V or 4-20 mA.
These signal channels can be applied to receive commands or reference values from external control systems according to the functions supported by the manufacturer, with terminal positions and parameter settings needing verification before installation.
Overload Capability
| Operating Type |
60 Seconds |
1 Second |
| G Type | 150% Rated Current | 180% Rated Current |
| P Type | 120% Rated Current | 150% Rated Current |
The above data is the overload capability according to the SG-VB Series catalog. The selection of usage must also check Duty Cycle, environmental temperature and installation requirements.
Application Examples (Applications)
- Three-phase motor speed control system
- Industrial water pump systems
- Fan and ventilation systems
- Air conditioning and AHU systems
- Belt conveyor systems
- Machinery control systems in industrial plants
- Speed control through PLC or HMI
- Factory Automation and Motor Control Systems
Selecting SG-VB-4T075G/093P Guidelines
- Check the motor power and rated current.
- Determine whether the load is suitable for G Type or P Type.
- Verify three-phase electrical system voltage.
- Inspect starting current and overload characteristics.
- Evaluate required speed range and torque.
- Review RS485 Modbus systems to be used in conjunction.
- Check wiring specifications, protective devices, and circuit breakers.
- Verify control cabinet size, cooling distance, and installation requirements.
- Confirm Nameplate and Datasheet of the actual model sold.
Installation Precautions
- Install by an electrician or personnel knowledgeable about power systems
- Check the voltage and number of phases of the power supply system before installation
- Verify motor current rating against the inverter
- Select wiring and protective devices suitable for actual operating current values
- Inspect grounding system and wiring according to manufacturer's manual
- Air cooling space around the inverter should be properly arranged
- Separate power cables from signal and communication lines as per instructions
- Check motor parameter settings before RUN command
- Consider braking systems and accessories based on load characteristics
- Turn off power, lock power source, and wait for DC Bus Discharge according to manual before starting or maintenance
- Do not use inverter stop commands as a substitute for emergency stop circuits that must be designed per safety requirements
Important Notes Before Purchase
- The product is the SANGI ELECTRIC SG-VB-4T075G/093P Inverter model
- Belonging to the SG-VB Series family
- The base model number VB-4T075G/093P specifies a rating of 75 kW for G Type and 93 kW for P Type
- Supports V/F control and Torque Control as per SG-VB Series data
- Supports RS485 Modbus communication
- The current rating and unit size must be verified from the actual SANGI model documentation
- Must verify suitability of inverter capacity with load before purchase
- Data from external VB Series base models must be confirmed before use as a sales specification

