KEPLER KC-Series Optional Coating Thickness Gauge Probe (Additional Probe for Coating Thickness Gauge)
KEPLER Optional Probe for KC-Series Coating Thickness Gauge is an additional probe for the KEPLER KC-Series Coating Thickness Gauge, used to measure the thickness of paint, film, and coating on metal materials according to the type of probe and gauge supported. It is suitable for paint quality inspection, coating process control, and coating thickness inspection in the industry.
The probe is available according to the measurement principle, including Magnetic Induction for Ferrous base metals and Eddy Current for Non-Ferrous base metals. Some probe models support both measurement principles. It is necessary to select the model that matches the actual base material and gauge used.
The separate probe design helps increase convenience in measuring areas with limited space, and the probe can be selected to suit the surface characteristics, thickness range, and shape of the workpiece according to the manufacturer's data.
General Features (Features)
- Brand: KEPLER
- Product Type: Optional Coating Thickness Gauge Probe
- It is an additional or replacement probe for supported coating thickness gauges
- Available probes for Ferrous and Non-Ferrous base materials
- Uses Magnetic Induction or Eddy Current principle depending on the probe type
- Suitable for measuring paint and coating thickness
- Measurement range can be selected according to the probe model
- Available models for applications requiring a wider measurement range
- Compatible with KEPLER KC-Series gauges according to specified models
- Check probe compatibility before ordering
Probe Types
| Probe Type | Measurement Principle | Application |
| F Probe (Ferrous) |
Magnetic Induction |
Measures suitable coating thickness on magnetic base metals, such as steel |
| N Probe (Non-Ferrous) |
Eddy Current |
Measures non-conductive coating thickness on non-magnetic base metals, such as aluminum |
| FN Probe |
Magnetic Induction / Eddy Current |
Supports measurement on two groups of base metals according to the model and conditions specified by the manufacturer |
List of Probes Related to KC-Series
SCMA General Catalog Vol.5 shows a variety of probe models in the KEPLER coating thickness gauge group, including F1, N1, F1/90°, F10, F400, F1.5, N1.5, FN1.5, F1.5R, F3.5, and FN3.5. Each probe has different measurement ranges and usage requirements.
Confirm the probe model with the gauge before ordering, as being in the same product category does not mean that all probe types can be connected to all KC-Series models.
Example Data of KC-Series Gauges and Related Probes
| Gauge Model / Series |
Probe Information |
Remarks |
| KC-200F1 |
F1 Standard Probe |
Used for Ferrous base materials |
| KC-200N1 |
N1 Standard Probe |
Used for Non-Ferrous base materials |
| KC-200 Series |
F1/90°, F10, F400 |
Specified as additional probes in the catalog; check sub-models and compatibility |
| KC-2605 |
F1.5, N1.5, FN1.5, F1.5R, F3.5, FN3.5, F10 |
Shown in the KC-2605 probe type table |
| KC-270F1 |
F1 |
Ferrous standard probe listed in the equipment list |
| KC-270N1 |
N1 |
Non-Ferrous standard probe listed in the equipment list |
Principle of Operation of Magnetic Induction Probes
Magnetic Induction probes are used to measure the thickness of suitable coatings on Ferrous base materials by utilizing changes in magnetic properties related to the distance between the probe and the base material.
The gauge processes signals from the probe and displays the coating thickness value according to calibration and measurement conditions. Suitable for inspecting paint and coatings on steel parts.
Principle of Operation of Eddy Current Probes
Eddy Current Probe uses the principle of induced eddy currents in conductive and non-magnetic base materials, then measures the changes in the signal related to the thickness of the non-conductive coating
Suitable for inspecting appropriate coating types on base materials, such as aluminum. The measurement results depend on the properties of the base material, workpiece thickness, surface condition, and calibration
Selecting the Probe Based on the Type of Work
- Check which KC-Series model the measuring instrument in use is
- Select Ferrous, Non-Ferrous, or FN probe appropriately for the base material
- Check the thickness range of the coating to be measured
- Consider the size of the workpiece surface and its curvature
- Check the probe's contact surface size
- Check the compatibility of the probe connector and the measuring instrument
- Select a specialized probe model for hard-to-reach areas according to the supported list
- Check the foil standards and reference workpieces for calibration
- Confirm the probe code before ordering
Usage and Calibration
- Check the compatibility of the probe with the measuring instrument before connecting
- Check the condition of the probe and signal cable before use
- Clean the workpiece surface before measurement
- Use appropriate reference base material plates and Calibration Foil
- Perform Zero or Multi-Point calibration according to the user manual of the measuring instrument model in use
- Place the probe in contact with the surface appropriately as specified by the manufacturer
- Avoid tilting the probe or pressing it onto the surface incorrectly
- Repeat measurements at multiple points when assessing coating uniformity
- Check the measurement results according to the quality criteria of the work
- Clean and store the probe after use
Examples and Usage Guidelines
- Check the thickness of paint on steel parts
- Check the thickness of coating on aluminum
- Check the thickness of paint in industrial painting work
- Check the thickness of paint on automotive parts
- Check the coating on machine parts
- Used in surface coating quality control work
- Used as a replacement probe when the original probe is damaged or deteriorated
- Used in dry film thickness (Dry Film Thickness) inspection work
Considerations
- The product is an additional probe, not a complete coating thickness measuring instrument set
Make sure to check the machine model and probe code for compatibility before ordering
Probes F, N, and FN have different measurement principles and limitations
The probe does not automatically support measurement on all types of base materials
The measurement range and accuracy depend on the probe and machine model used
Do not use the measurement range of the KC-200 or KC-270 machine to replace the specifications of the KC-2605 probe without proper documentation
Check the surface condition, curvature, and material hardness of the base before measurement
Calibrate the machine after changing the probe according to the manufacturer's manual
For coating inspections with standard requirements, select appropriate instruments and measurement methods
Check the list of probes and equipment to be received before ordering
