SANGI IFD03(1/8")-N-1-DC24V 5/2 Way Pneumatic Solenoid Valve with Double Coil, Size 1/8 inch
SANGI IFD03(1/8")-N-1-DC24V Pneumatic Solenoid Valve is a solenoid valve used to control the direction of compressed air flow in pneumatic systems. It has a 5/2 Way or 5 Ports, 2 Positions configuration with five air channels and two operating positions.
This model features an air connection size of 1/8 inch, uses a double coil (Double Coil) at 24VDC for electrically switching the valve position. It is suitable for automatic machinery systems requiring control over compressed air direction through dual-coil operation.
General Features
- Product Model: IFD03(1/8")-N-1-DC24V
- Brand: SANGI
- Product Type: Pneumatic Solenoid Valve
- Valve Configuration: 5/2 Way (5 Ports, 2 Positions)
- Air Connection Size: 1/8 inch
- Operating Medium: Air (compressed air)
- Coil Configuration: Double Coil
- Coil Voltage: 24VDC
- Controls the direction of compressed air flow in pneumatic systems.
- Suitable for controlling air cylinders and automatic machinery systems.
Technical Specifications (Technical Specifications)
| Model | IFD03(1/8")-N-1-DC24V |
| Brand | SANGI |
| Product Type | Pneumatic Solenoid Valve |
| Valve Function | 5/2 Way |
| Number of Ports | 5 |
| Number of Positions | 2 |
| Port Size | 1/8" |
| Operating Medium | Air |
| Coil Configuration | Double Coil |
| Coil Voltage | 24VDC |
Principle of Operation
The 5/2 Way solenoid valve has five air channels, consisting of one supply channel, two working channels, and two exhaust channels. It is used to switch the direction of compressed air flow between the two operating positions.
For the IFD03(1/8")-N-1-DC24V model, it is a Double Coil valve which uses two sets of electric coils to control the position change of the valve. Proper control circuits and coil operation sequences should be checked according to the manufacturer's documentation before use.
Generally, a Double Coil valve can maintain its last position after power-off, but the actual operating characteristics of this model must be verified from the circuit symbols on the valve itself.
Size and Installation
The IFD03(1/8")-N-1-DC24V is a solenoid valve for compressed air systems with 1/8 inch connections. Before installation, ensure that the thread standards and connection sizes match those of the pneumatic system.
Connect the supply air port, working port, and exhaust port according to the symbols specified on the device, check the wiring of both coil sets, and select an appropriate DC24V coil drive circuit.
Examples and Usage Guidelines
- Control a double-acting pneumatic cylinder (Double-acting Cylinder)
- Switch the direction of compressed air flow in automatic machinery
- Apply to workpiece holding and moving systems using compressed air
- Use with PLCs that have two DC24V coil drive circuits as appropriate
- Used in pneumatic systems requiring valve operation from both coils
Considerations
- The IFD03(1/8")-N-1-DC24V is a 5/2-way double-coil air valve.
- Use DC24V coil voltage; do not supply AC110V or AC220V to the coils.
- Check the operating air pressure according to the manufacturer's specifications before installation.
- Verify the thread type and port positions of the valve before connecting pneumatic lines.
- Inspect the terminals and power ratings of both coil sets before designing control circuits.
- The control circuit should be designed to prevent simultaneous power supply to both coils, unless explicitly permitted by the manufacturer.
- Check the valve's position-holding mechanism from the circuit symbols and manual.
- Disconnect power sources and exhaust air pressure before installation or maintenance.
