SANGI IFD03(1/8")-N-1-D-AC220V 5/2 Way Pneumatic Solenoid Valve with Dual Coil and Plug LED
SANGI IFD03(1/8")-N-1-D-AC220V Pneumatic Solenoid Valve is a solenoid valve used to control the direction of compressed air flow in pneumatic systems. It belongs to the 5/2 Way or 5 Ports, 2 Positions valve category, which has five air channels and two operating positions.
This model specifies a port size of 1/8 inch, uses AC220V coil voltage, and features a Plug LED for displaying the electrical status of the coil set. The FD03 series is a dual-coil solenoid valve designed to change the position of the valve with two-sided electric coils, suitable for controlling compressed air systems and automatic machinery.
General Features
- Product Model: IFD03(1/8")-N-1-D-AC220V
- Brand: SANGI
- Product Type: Pneumatic Solenoid Valve
- Product Series: IFD03 / FD03
- Valve Configuration: 5/2 Way (5 Ports, 2 Positions)
- Pipe Connection Size: 1/8 inch
- Operating Medium: Air (compressed air)
- Coil Type: Double Coil
- Coil Voltage: AC220V
- Status Indicator Plug: Plug LED
- Used to control the direction of compressed air flow in pneumatic systems.
Technical Specifications (Technical Specifications)
| Model | IFD03(1/8")-N-1-D-AC220V |
| Brand | SANGI |
| Product Type | Pneumatic Solenoid Valve |
| Product Series | IFD03 / FD03 |
| Valve Function | 5/2 Way |
| Number of Ports | 5 |
| Number of Positions | 2 |
| Port Size | 1/8" |
| Operating Medium | Air |
| Coil Configuration | Double Coil |
| Coil Voltage | 220VAC |
| LED Indicator | Plug LED |
Principle of Operation
A 5/2 Way solenoid valve has a total of 5 ports, including one air supply port, two working ports, and two exhaust ports. It can switch the direction of compressed air flow between the two operating positions to control pneumatic equipment such as double-acting cylinders.
The FD03 Double Coil type valve uses two sets of electric coils for controlling the position change of the valve. The control circuit must be designed appropriately according to the characteristics of the device and avoid powering both sides of the coil simultaneously, unless specified by the manufacturer that it is possible.
The LED on the plug set indicates the power supply status to the coil circuit as per the plug design; it does not directly detect or confirm the mechanical position of the valve.
Size and Installation
IFD03(1/8")-N-1-D-AC220V has an air port size of 1/8 inch. Before installation, check the thread standard, connector size, and positions of the supply port, working ports, and exhaust port according to the symbols on the valve.
The electrical system installation requires a power source of AC220V and should verify the frequency, coil power, and correct wiring pattern of the LED plug. Consider controlling each side of the coil as per the manufacturer's specifications.
Examples and Usage Guidelines
- Control pneumatic double-acting cylinders (Double-acting Cylinder)
- Switch compressed air direction in automatic machinery
- Apply to workpiece holding and movement systems using compressed air
- Use with PLC through relays or switches supporting AC220V coils
- Utilize the LED plug's light to check power supply status to the coil during system inspection
Considerations
- The IFD03(1/8")-N-1-D-AC220V model specifies AC220V coil with Plug LED.
- Used in compressed air systems, featuring a 5/2 Way Double Coil type according to the FD03 series.
- Avoid using DC24V or AC110V directly as an alternative power source for AC220V.
- Check operating air pressure according to specific model requirements.
- Verify thread standards and port positions before installation.
- Inspect plug LED terminals and circuit details before powering on.
- Check coil voltage and frequency from the product label.
- The LED does not confirm that the valve mechanism has moved successfully.
- Cut off power supply and exhaust air pressure before performing installation or maintenance.
