SANGI IFD03(1/8")-N-1-AC220V 5/2 Way Pneumatic Solenoid Valve with Double Coil, Size 1/8 inch
SANGI IFD03(1/8")-N-1-AC220V Pneumatic Solenoid Valve is a solenoid valve designed to control the direction of compressed air flow in pneumatic systems. It operates on a 5/2 Way or 5 Ports, 2 Positions configuration, featuring five air ports and two operating positions.
This model features an air connection port size of 1/8 inch with a double coil (Double Coil) at AC220V voltage for electrically switching the valve position via signals from both coils. It is suitable for automated machinery requiring independent control commands for each valve position to direct compressed air flow.
General Features
- Model: IFD03(1/8")-N-1-AC220V
- Brand: SANGI
- Product Type: Pneumatic Solenoid Valve
- Series: IFD03
- Valve Configuration: 5/2 Way (5 Ports, 2 Positions)
- Air Connection Port Size: 1/8 inch
- Operating Medium: Air (compressed air)
- Coil Type: Double Coil
- Coil Voltage: AC220V
- Controls the direction of compressed air flow in pneumatic systems.
- Suitable for air cylinder control and automated machinery systems.
Technical Specifications (Technical Specifications)
| Model | IFD03(1/8")-N-1-AC220V |
| Brand | SANGI |
| Product Series | IFD03 |
| Product Type | Pneumatic Solenoid Valve |
| Valve Function | 5/2 Way |
| Number of Ports | 5 |
| Number of Positions | 2 |
| Port Size | 1/8" |
| Operating Medium | Air |
| Coil Configuration | Double Coil |
| Coil Voltage | 220VAC |
Principle of Operation
The 5/2 Way solenoid valve has a total of five air ports, including one supply port, two working ports, and two exhaust ports. It allows switching the direction of compressed air flow between the two operating positions.
For the IFD03(1/8")-N-1-AC220V model, it uses two sets of electric coils to control the position of the valve. When AC220V power is supplied to one coil, the valve will move to a position corresponding to that coil and can be switched to another position through the other coil.
Generally, a double-coil valve can maintain its last position after power-off, but it must be verified from circuit symbols or specific model manuals before use.
Size and Installation
The IFD03(1/8")-N-1-AC220V is an air solenoid valve for compressed air systems with a 1/8 inch pipe connection. Before installation, it's important to check the thread standards, fitting sizes, and air inlet port, working port, and exhaust port positions to match the pneumatic system.
The electrical installation requires an AC220V power supply and control circuits that support both coils. It is necessary to verify the voltage, frequency, and wiring diagrams from equipment labels or manufacturer's manuals.
Examples and Usage Guidelines
- To control the operation of a double-acting pneumatic cylinder (Double-acting Cylinder)
- To switch the direction of compressed air flow in automatic machinery
- To use in systems for gripping and moving workpieces with compressed air
- Used together with PLC through relays or switches that support two AC220V coils
- Adapted to pneumatic systems requiring valve position changes by separate dual-coil control
Considerations
- The IFD03(1/8")-N-1-AC220V model is a 5/2-way double-coil solenoid valve for compressed air.
- Use AC220V coil voltage, do not substitute with DC24V or AC110V directly.
- Check the operating air pressure range according to the manufacturer's specifications.
- Verify the thread type and port positions of the valve before installation.
- Check the power supply capacity, frequency, and wiring of both coils.
- The control circuit should be designed to prevent simultaneous power supply to both coils unless explicitly permitted by the manufacturer.
- Check the valve's position-holding mechanism from the equipment circuit symbols.
- Cut off the power source and exhaust air pressure before installation or maintenance.
