SANGI FR10(3/8")-N-2-AC220V 5/3 Way Double Coil Pneumatic Solenoid Valve with 3/8" Port Size
SANGI FR10(3/8")-N-2-AC220V Pneumatic Solenoid Valve is a solenoid valve designed to control the direction of compressed air flow in pneumatic systems. It features a 5/3 Way or 5 Ports 3 Positions configuration, consisting of five air ports and three operating positions.
This model specifies an air port size of 3/8 inch according to its model code, uses double coil (Double Coil) with AC220V power supply for electrically actuated valve position changes. It is suitable for controlling pneumatic cylinders, automatic machinery, and compressed air systems in industries requiring three-position directional control valves.
General Features
- Model: FR10(3/8")-N-2-AC220V
- Brand: SANGI
- Product Type: Pneumatic Solenoid Valve
- Series: FR10
- Valve Configuration: 5/3 Way (5 Ports, 3 Positions)
- Air Port Size According to Model Code: 3/8 inch
- Operating Medium: Air (compressed air)
- Coil Type: Double Coil
- Coil Voltage: AC220V
- Used for controlling and switching the direction of compressed air flow
- Suitable for pneumatic cylinder control systems and automatic machinery
Technical Specifications (Technical Specifications)
| Model | FR10(3/8")-N-2-AC220V |
| Brand | SANGI |
| Product Series | FR10 |
| Product Type | Pneumatic Solenoid Valve |
| Valve Function | 5/3 Way |
| Number of Ports | 5 |
| Number of Positions | 3 |
| Port Size | 3/8" (model code specified, confirm actual port size) |
| Operating Medium | Air |
| Coil Configuration | Double Coil |
| Coil Voltage | 220VAC |
| Operating Pressure Range | 1.5-8 bar (FR Series Catalog) |
| Seal Material | NBR (Standard, FR Series) |
| Ambient Temperature | -5 to +50°C (FR Series Catalog) |
| Body Material | Aluminium (FR Series Catalog) |
| Center Position Function | Must check the specific model circuit symbol |
Operating Principle
The 5/3 Way Solenoid Valve has a total of 5 air channels, including one supply channel, two working channels, and two exhaust channels. It has three operating positions to determine the direction of compressed air flow to pneumatic equipment.
For model FR10(3/8")-N-2-AC220V, it uses a double coil (Double Coil) for valve position change commands. When AC220V power is supplied to one coil, the valve changes its position according to the command and can be switched to the other side using another coil.
The 5/3 Way Valve has an additional center position (Center Position) beyond the two working positions. The connection port configuration in the center position must be checked from the actual model circuit symbol before selection, as it affects the operation of the air cylinder and system safety.
Size and Installation
The FR10(3/8")-N-2-AC220V specifies a 3/8 inch air connection size according to the model code. However, another part of the product information states PIPE 1/4, so it is advisable to verify the actual port size from the equipment or manufacturer documentation before purchasing connectors and installing.
It is necessary to check the thread standard, connector size, and positions of supply air ports, working ports, and exhaust ports according to the symbols on the valve. Additionally, ensure that the operating air pressure is appropriate for the system.
The electrical installation must use an AC220V power source and control equipment supporting both coils. Check the frequency, coil power, plug type, and wiring diagram from the equipment label or manufacturer documentation before powering up.
Examples and Usage Guidelines
- Control the two-way (Double-acting Cylinder) pneumatic cylinder working direction
- Control compressed air direction in an automated machine system
- Apply to workpiece holding and moving systems using compressed air
- Use with PLC through relays or switches supporting both AC220V coils
- Used in pneumatic systems requiring a three-position valve, checking the center position configuration for suitability of use
Considerations
- The FR10(3/8")-N-2-AC220V model is a 5/3 Way Double Coil solenoid valve for compressed air.
Use AC220V coil voltage, do not directly supply DC24V or AC110V
Must verify the actual port size as the model code specifies 3/8 inch but received details indicate PIPE 1/4
Check the port connection configuration in the center position from the specific model circuit symbol
Verify that the air pressure range matches the manufacturer's specifications
Inspect thread standards and port positions before installation
Check the power supply, frequency, and wiring of both coil sets
The control circuit should be designed to avoid supplying power to both coil sets simultaneously unless explicitly permitted by the manufacturer
No confirmed information that this model has a Plug LED so it is not specified as a specific feature
Disconnect power source and bleed air pressure before installation or maintenance
