SANGI FC06(1/4")-N-2-D-AC220V 5/3 Way Pneumatic Solenoid Valve with Double Coil, 1/4" Size
SANGI FC06(1/4")-N-2-D-AC220V Pneumatic Solenoid Valve is a solenoid valve designed to control the direction of compressed air flow in pneumatic systems. It features a 5/3 Way or 5 Ports, 3 Positions configuration with five air ports and three operating positions.
This model has an air connection size of 1/4 inch and uses a double coil (Double Coil) with AC220V power supply to switch the valve position via electrical signals from both coils. It is suitable for controlling compressed air systems in automatic machinery, pneumatic cylinder control systems, and directional airflow control requiring three-position valves.
General Features
- Product Model: FC06(1/4")-N-2-D-AC220V
- Brand: SANGI
- Product Type: Pneumatic Solenoid Valve
- Product Series: FC06
- Valve Configuration: 5/3 Way (5 Ports, 3 Positions)
- Air Connection Size: 1/4 inch
- Operating Medium: Air (compressed air)
- Coil Type: Double Coil
- Coil Voltage: AC220V
- Sub-model Code: -D-
- Controls and switches the direction of compressed air flow in pneumatic systems
- Suitable for automatic machinery and compressed air control equipment
Technical Specifications (Technical Specifications)
| Model | FC06(1/4")-N-2-D-AC220V |
| Brand | SANGI |
| Product Series | FC06 |
| Product Type | Pneumatic Solenoid Valve |
| Valve Function | 5/3 Way |
| Number of Ports | 5 |
| Number of Positions | 3 |
| Port Size | 1/4" |
| Operating Medium | Air |
| Coil Configuration | Double Coil |
| Coil Voltage | 220VAC |
| Ordering Code | -D- |
| Operating Pressure Range | 1.5-8 bar (FC Series Catalog) |
| Seal Material | NBR (Standard, FC Series) |
| Ambient Temperature | -5 to +50°C (FC Series Catalog) |
| Body Material | Aluminium (FC Series Catalog) |
Operating Principle
The 5/3 Way Solenoid Valve has a total of five air channels, including one supply channel, two working channels, and two exhaust channels. It has three operating positions to determine the flow path of compressed air to pneumatic equipment.
For model FC06(1/4")-N-2-D-AC220V, it uses a double coil (Double Coil). When AC220V power is supplied to one coil, the valve will change position according to the command and can switch to the other side using the second coil.
The 5/3 Way Valve has an additional center position (Center Position) beyond the two operating positions. The connection pattern of ports in the center position affects the behavior of the pneumatic system, so it is advisable to check the circuit symbols of the actual valve model before designing a system.
Size and Installation
The FC06(1/4")-N-2-D-AC220V is a solenoid valve for compressed air systems with a 1/4 inch air pipe connection. Before installation, it is necessary to check the thread standards and compatibility of fittings, as well as verify the supply port, working ports, and exhaust ports from the symbols on the valve.
The electrical installation requires an AC220V power source and control circuits that support double coils. It is important to check the frequency of electricity, coil power, plug type, and details of accessory code -D- from the manufacturer's documentation or equipment labels before powering up.
Examples and Usage Guidelines
- Control the direction of operation for a two-way pneumatic cylinder (Double-acting Cylinder)
- Control compressed air flow in automatic machinery systems
- Apply to workpiece holding and moving systems using compressed air
- Use with PLC through relays or switches that support both AC220V coils
- Used in pneumatic systems requiring three-position valve control, where the center position must be selected appropriately for the application.
Considerations
- The FC06(1/4")-N-2-D-AC220V is a 5/3 Way double coil solenoid valve for compressed air systems.
- It uses an AC220V voltage coil, direct replacement with DC24V or AC110V should not be done.
- The connection pattern of ports in the center position must be checked from the actual valve symbols.
Check the operating air pressure to match the manufacturer's specifications
Inspect the thread standards and port positions before installation
Verify the electrical frequency, coil power, and wiring details of both sets of coils
The control circuit should be designed to avoid powering both sets of coils simultaneously unless explicitly permitted by the manufacturer
Check the plug type and accessories of code -D- before installation
No direct confirmation data is available regarding whether this model has an LED status indicator, so this feature is not specified
Cut off power supply and exhaust air pressure before installation or maintenance
