SANGI FC06(1/4")-N-2-AC220V 5/3 Way Pneumatic Solenoid Valve with Double Coil and 1/4" Port Size
SANGI FC06(1/4")-N-2-AC220V Pneumatic Solenoid Valve is a solenoid valve designed to control the direction of compressed air flow in pneumatic systems. It features a 5/3 Way or 5 Ports, 3 Positions configuration with a total of five air ports and three operational positions.
This model has an air port size of 1/4 inch and uses a double coil (Double Coil) at AC220V to switch the valve position via electrical signals from both sides of the coil. It is suitable for pneumatic cylinder control systems, automatic machinery, and equipment requiring three-position directional control valves.
General Features
- Product Model: FC06(1/4")-N-2-AC220V
- Brand: SANGI
- Product Type: Pneumatic Solenoid Valve
- Product Series: FC06
- Valve Configuration: 5/3 Way (5 Ports, 3 Positions)
- Air Port Size: 1/4 inch
- Operating Medium: Air (compressed air)
- Coil Type: Double Coil
- Coil Voltage: AC220V
- Controls the direction of compressed air flow through a three-position valve
- Suitable for automatic machinery and industrial pneumatic systems
Technical Specifications (Technical Specifications)
| Model | FC06(1/4")-N-2-AC220V |
| Brand | SANGI |
| Product Series | FC06 |
| Product Type | Pneumatic Solenoid Valve |
| Valve Function | 5/3 Way |
| Number of Ports | 5 |
| Number of Positions | 3 |
| Port Size | 1/4" |
| Operating Medium | Air |
| Coil Configuration | Double Coil |
| Coil Voltage | 220VAC |
| Operating Pressure Range | 1.5-8 bar (FC Series Catalog) |
| Seal Material | NBR (Standard, FC Series) |
| Ambient Temperature | -5 to +50°C (FC Series Catalog) |
| Body Material | Aluminium (FC Series Catalog) |
Principle of Operation
The 5/3 Way Solenoid Valve has a total of 5 air channels, including 1 supply channel, 2 working channels, and 2 exhaust channels. It has 3 operating positions to control the flow direction of compressed air to pneumatic equipment.
For model FC06(1/4")-N-2-AC220V, it uses a double coil (Double Coil) by supplying AC220V power to one side of the coil to command the valve to change position according to instructions. It can also switch to another position using the other side's coil.
The 5/3 Way Valve has an additional center position (Center Position) from the two working positions, and the port connection characteristics in the center position must be checked from the actual device circuit symbols before use, especially for systems that need to control the movement of pneumatic cylinders appropriately and safely.
Size and Installation
The FC06(1/4")-N-2-AC220V has a 1/4 inch air pipe connection. Before installation, it is necessary to check the thread standards and fitting sizes suitable for the system, as well as to verify the supply port, working ports, and exhaust ports according to the symbols on the valve.
The electrical installation must use an AC220V power source and control devices that support both coils. Check the frequency of electricity, coil power consumption, plug type, and wiring diagram from the product label and manufacturer's documentation before powering up.
Examples and Usage Guidelines
- Control the two-way directional operation of pneumatic cylinders (Double-acting Cylinder)
- Control the flow of compressed air in automatic machinery
- Adapt to use with systems for holding and moving workpieces using compressed air
- Use together with PLC through relays or switches that support double AC220V coils
- Used in pneumatic systems requiring a three-position valve, where the center position's operation must be verified according to requirements.
Considerations
- The FC06(1/4")-N-2-AC220V model is a 5/3 Way Solenoid Valve with double coils for compressed air.
- Use AC220V coil voltage, do not directly substitute DC24V or AC110V.
- Must check the center position pattern and port connections from actual valve symbols.
- Verify the operating air pressure according to manufacturer specifications.
- Check port sizes and thread standards before selecting fittings.
Check the electrical power, frequency, and coil wiring for both sets
The control circuit should be designed to avoid supplying power to both coil sets simultaneously unless the manufacturer explicitly permits it
No confirmed information is available regarding whether this model has a Plug LED or status indicator light, so these are not specified as specific features of this model
Disconnect the power source and release air pressure before installation or maintenance
