KLVD-25, KEPLER, Low Voltage Detector, Non-Contact Voltage Detector, AC Voltage Detector, Non-Contact AC Voltage Tester, 50V-1000V Voltage Detector, Voltage Detection Pen, Electrical Voltage Detector, Voltage Tester with Vibration Alert, LED Voltage Detector, Voltage Detector, Non-contact Voltage Tester, Non-contact AC Voltage Meter, 50-1000VAC Voltage Detector, Wire Check Light, Vibration Alert Voltage Detector, KEPLER Voltage Detector
KEPLER KLVD-25 Low Voltage Detector is a non-contact AC voltage detector designed to check the presence of electrical voltage on wires and electrical equipment. It supports an AC voltage detection range of 50-1000VAC at frequencies from 50-500Hz.
The device features both vibration alerts and LED lights for notification when voltage is detected, along with a flashlight to help illuminate areas in low light conditions during inspection. There's also an on/off switch to conserve battery power. Ideal for electricians, maintenance workers, and electrical system inspectors.
Features and Technical Data
Brand: KEPLER
Model: KLVD-25
Type of Product: Low Voltage Detector
Detection Method: Non-Contact AC Voltage Detection
Voltage Detection Range: 50-1000VAC
Frequency Range: 50-500Hz
Alert System: Vibration Alert and LED Light
Lights: Flashlight
Control: On/Off Switch
Usage Method: Detect AC voltage without direct contact with electrical conductors.
Voltage Detection System
Detects alternating current voltages in the range of 50-1000VAC
Suitable for frequencies ranging from 50-500Hz
Checks for voltage presence on wires and electrical equipment
Uses non-contact detection technology to detect voltage
Alert System and Lighting
Vibration Alert: The device vibrates when it detects voltage.
LED Indicator: An LED light illuminates to notify of detected voltage.
Flashlight: A flashlight helps illuminate areas for inspection.
Power Switch: An on/off switch controls usage and conserves battery power.
Safety Standards
EN 61010-1
EN 61326-1
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-8
CAT III 1000V
Usage Examples and Guidelines
Check for the presence of AC voltage along wires or cables.
Inspect wiring before starting initial maintenance work.
Check outlets, switches, and electrical equipment.
Use to inspect electrical systems within buildings and industrial plants.
Aids in locating areas that may have AC voltage.
Uses an integrated flashlight to help illuminate dark areas during inspection.
Limits and Considerations
This device is for detecting the presence of voltage, not for measuring numerical voltage values.
Suitable for detecting AC voltages in the range of 50-1000VAC; does not specify detection capability for DC voltage.
Detection ability depends on wire characteristics, insulation, distance, and environment.
The absence of an alert signal cannot confirm that a circuit is free from voltage.
It is recommended to test the device's operation with known voltage sources before and after use.
If confirming zero voltage status prior to work is necessary, appropriate voltage testing equipment must be used along with following proper electrical safety procedures.
Check battery condition and alert system functionality before using.
Note: Technical data referenced from SCMA General Catalog Vol.5 model KLVD-25, which is an AC non-contact voltage detector featuring a vibration alarm system, LED light, and flashlight.
We use cookies to make the site work properly, to understand how it is used, and to show content that is relevant to you. You choose which types to allow; strictly necessary cookies are always on. Privacy Policy