Toggle Nav
My Cart 0

KAM-22SD HOT WIRE ANEMOMETER KEPLER

Price on request – please contact us
Out of stock
SKU
050970
Out of stock

The price for this item is not shown online yet.

Ask for a price on LINE

KEPLER

KAM-22SD, KEPLER, Hot Wire Anemometer, Hot Wire Air Velocity Meter, Digital Anemometer, Hot Wire Anemometer with SD Card, Anemometer Data Logger, Air Velocity Meter, Wind Speed Meter, Thermal Anemometer, 0.2-35.0 m/s, Air Flow Meter, CMM, CFM, Temperature Meter, Humidity Meter, Relative Humidity, Dew Point, Wet Bulb, Type K Thermocouple, -100 to 1300°C, Real Time Data Logger, SD Card Recording, 1-3600 Seconds Sampling Interval, RS232, USB Interface, Data Hold, Industrial Anemometer, HVAC Measurement, Ventilation Testing, Digital Hot Wire Air Velocity Meter, Digital Wind Speed Meter, Air Flow Measuring Instrument, Temperature and Humidity Meter, KEPLER Anemometer with SD Card Logging, KAM-22SD Anemometer, Air Conditioning System Measurement Tool, HVAC Measurement Tool

*Price does not include VAT

KEPLER KAM-22SD Hot Wire Anemometer

The KEPLER KAM-22SD Hot Wire Anemometer is a hot wire anemometer with data logging to SD Card, suitable for measuring air velocity, airflow rate, temperature, and humidity in HVAC systems, ventilation systems, and industrial environmental monitoring.

This device supports wind speed measurement from 0.2-35.0 m/s and calculates airflow rates in CMM and CFM units. It also measures relative humidity (%RH), calculates dew point, and determines wet bulb temperature.

The KAM-22SD can measure air temperature from 0 to 50°C and use a Type K thermocouple for temperature measurement ranging from -100 to +1300°C as per the catalog. For accurate measurements with Type K, appropriate probes suitable for the temperature range and application must be used.

A key feature of this device is real-time data logging onto an SD Card, allowing users to set recording intervals from 1-3600 seconds. Data can then be exported in a format compatible with Microsoft Excel as specified in the catalog, along with RS232 / USB interfaces for computer connectivity.

General Features

  • Brand: KEPLER
  • Model: KAM-22SD
  • Type of Product: Hot Wire Anemometer
  • Air velocity measurement range: 0.2-35.0 m/s
  • Airflow rate calculation in CMM and CFM units
  • Relative humidity (%RH) measurement support
  • Dew Point and Wet Bulb calculations supported
  • Air temperature measurement range: 0-50°C
  • Type K thermocouple temperature measurement from -100 to +1300°C
  • Real-time data logging function onto SD Card
  • Data recording interval setting from 1-3600 seconds
  • Export recorded data for use with Microsoft Excel in specified file format
  • Data Hold function to retain displayed values on screen
  • Computer connectivity via RS232 / USB interfaces as supported by equipment
  • Suitable for HVAC system inspection, air duct systems, and ventilation systems

Technical Specifications (Technical Specifications)

<

Hot Wire Anemometer Operating Principle

The Hot Wire Air Velocity Meter uses a sensor that detects changes in heat transfer when air currents pass through it. The electronic circuit processes these changes and displays them as air velocity values.

The Hot-Wire principle is suitable for measuring air flow, especially where access to narrow ducts or air passages is required. However, the measurement range and accuracy depend on the specifications of the instrument and the probe being used.

To calculate flow rates in units of CMM or CFM, you must define the cross-sectional area and select an appropriate measurement position based on the characteristics of the air duct to ensure that the calculation results match the actual flow conditions.

Measurement Functions

  • Air Velocity: Measures air velocity in the range of 0.2-35.0 m/s
  • Air Flow: Calculates airflow volume in units of CMM and CFM
  • Air Temperature: Measures air temperature in the range of 0-50°C
  • Relative Humidity: Measures relative humidity in units of %RH
  • Dew Point: Calculates dew point temperature
  • Wet Bulb: Calculates wet bulb temperature
  • Type K Temperature: Measures temperature through Type K thermocouple in the range of -100 to +1300°C
  • Data Hold: Holds displayed values on screen
  • Real-Time Data Logging: Logs data at specified intervals onto SD Card

Data Logging System with SD Card

The KAM-22SD supports real-time data logging to an SD card, allowing users to set the logging interval from 1 to 3600 seconds to suit the required level of detail for measurements.

Logging data enables tracking trends in air velocity and related parameters over different time periods, aiding analysis of ventilation systems, maintenance work, or environmental monitoring.

The device features an RS232 / USB interface for connecting to a computer. Users should refer to the manual or product documentation for information on cables, software, and accessories that are compatible with this feature.

Usage and Measurement

  • Check the condition of the instrument and hot wire probe before use
  • Turn on the device and select measurement functions based on job requirements
  • Position the probe appropriately according to air flow direction
  • Avoid touching or impacting the hot wire sensor area
  • Wait for measured values to stabilize before reading or recording results
  • When using Air Flow mode, specify cross-sectional data as per instructions in the manual
  • Select an appropriate logging interval based on the measurement duration required
  • Check SD card readiness before using Data Logger
  • If using a Type K thermocouple, select probes with suitable temperature ranges for actual conditions
  • Review or analyze recorded data on a computer using supported file formats
  • Store the instrument and probes according to manufacturer's instructions after use
  • Usage Examples and Guidelines

    • Check wind speed in air ducts and ventilation openings
    • Measure airflow rate in HVAC systems
    • Evaluate the efficiency of air conditioning and ventilation systems
    • Monitor indoor temperature and humidity levels
    • Use for continuous recording of wind speeds for system inspection work
    • Apply to maintenance tasks involving fans and ductwork systems
    • Utilize in environmental monitoring and ventilation system checks within industrial facilities
    • Data collection for assessing trends in the performance of ventilation systems

    Considerations

    • The Hot Wire probe is delicate; avoid impacts or direct contact with the sensor part
    • Airflow measurement in ducts should be done at positions that minimize turbulent flow effects, and multiple measurements may be necessary to find an average value
    • CMM / CFM calculations depend on cross-sectional area and measured wind speed values
    • Type K temperature measurement requires verification of the probe's calibration point
    • Check SD card compatibility types and capacities from the manual before ordering
    • Verify whether RS232 / USB cables and accessories are included in the package or need to be ordered separately
    • If reference standards are required for measurement results, ensure that the instrument has been calibrated accordingly
    • Check accuracy, resolution, and unit size from the specific model datasheet before setting procurement requirements
    Write Your Own Review
    You're reviewing:KAM-22SD HOT WIRE ANEMOMETER KEPLER
    🤖 AI Assistant
    Ask about products, specs and replacement models
    Hello 👋 Ask us anything — find products, compare specs, or troubleshoot.
    🗑 Clear history
    BrandKEPLER
    ModelKAM-22SD
    Product TypeHot Wire Anemometer
    Measurement PrincipleHot-Wire Air Velocity Measurement
    Air Velocity Range0.2-35.0 m/s
    Air Flow MeasurementCMM / CFM
    Relative Humidity%RH Measurement
    Calculated ParametersDew Point / Wet Bulb
    Air Temperature Range0-50°C
    External Temperature SensorType K Thermocouple
    Type K Temperature Range-100 to +1300°C
    Data LoggingReal-Time SD Card Data Logger
    Logging Interval1-3600 Seconds
    Data File FormatExcel-Compatible (.xls), as Stated in Catalog
    PC InterfaceRS232 / USB
    Display FunctionData Hold
    Air Velocity Unitsm/s, ft/min, km/h, knots, mph
    Additional UnitsCMM, CFM, °C, °F, %RH
    Measurement AccuracyRefer to Manufacturer Datasheet
    Display ResolutionRefer to Manufacturer Datasheet
    Power SupplyRefer to Manufacturer Datasheet
    Dimensions / WeightRefer to Manufacturer Datasheet