The KEPLER KSM-14A Anemometer is the model name of the wind speed meter as per the received product list, intended for measuring air velocity in ventilation system inspections, HVAC systems, and environmental monitoring in buildings or industrial facilities. Specific technical details must be confirmed from manufacturer documentation.
A wind speed meter (Anemometer) is an instrument used to measure air movement at a specific location, aiding users in assessing airflow conditions, ventilation efficiency, and inspecting fan or HVAC systems.
For the code KSM-14A, measurement range, resolution, accuracy, or additional measuring functions cannot be confirmed from reviewed documents. Therefore, product codes and specifications should be verified before publication or actual use.
Usage Characteristics
Brand: KEPLER
Product code as per received list: KSM-14A
Type of Product: Anemometer
Used for measuring wind speed and air velocity
Suitable for ventilation system inspection and HVAC systems
Can be applied in environmental monitoring and maintenance work
Detailed functions and performance must be confirmed from the specific model manual
Technical Specifications
Brand
KEPLER
Model
KSM-14A (Model Code to Be Verified)
Product Type
Anemometer
Measurement Application
Wind Speed / Air Velocity
Air Velocity Range
To Be Confirmed
Measurement Accuracy
To Be Confirmed
Display Resolution
To Be Confirmed
Measurement Units
To Be Confirmed
Air Flow Measurement
To Be Confirmed
Temperature Measurement
To Be Confirmed
Humidity Measurement
To Be Confirmed
Display Type
To Be Confirmed
Power Supply
To Be Confirmed
Dimensions
To Be Confirmed
Weight
To Be Confirmed
Anemometer Measurement Principle
The anemometer uses a sensor to detect air movement and processes the data to display wind speed. The measurement principle may vary depending on the type of sensor used, such as propeller or hot-wire sensors.
Proper measurements should position the sensor in relation to the direction of airflow and avoid obstructed positions that could cause turbulence affecting the measured values.
Installation and Usage
Check the model number on the product label and manual before use.
Verify the readiness of the device and power supply.
Select an appropriate measurement location based on the purpose.
Position the sensor according to the airflow direction as per the instructions in the manual.
Await stable readings before recording or noting results.
Measure at multiple locations if assessing average wind speed over a space or air passage is required.
Maintain and store the equipment following manufacturer recommendations.
Usage Examples and Guidelines
Check airflow velocity from air intake and exhaust vents.
Measure wind speed in HVAC systems and installations.
Evaluate the performance of ventilation fans.
Assess air flow conditions in work areas.
Use for inspecting industrial ventilation systems.
Adapt for environmental monitoring and maintenance tasks.
Considerations
The code KSM-14A has not been confirmed directly from the SCMA General Catalog Vol.5.
A similar model, KAM-14A, is found in the catalog.
SPECIFICATIONS of KAM-14A should not be applied to KSM-14A without confirmation that both codes refer to the same model.
Check the measurement range, resolution, accuracy, and units from the specific model manual.
Verify support for temperature, humidity, or air flow rate measurements before specifying as features.
Check the product dimensions, power supply, and accessories before publishing the product information
We use cookies to make the site work properly, to understand how it is used, and to show content that is relevant to you. You choose which types to allow; strictly necessary cookies are always on. Privacy Policy