K8002A HVDM, K8002A, KEPLER, Digital Multimeters for Solar Power System, High Voltage Digital Multimeter, Digital Multimeter, Solar Power Multimeter, Solar PV Multimeter, High Voltage Multimeter, 1500V DC Multimeter, 750V AC Multimeter, 6000 Counts Multimeter, IP65 Digital Multimeter, Digital Multimeter, High Voltage Multimeter, Solar Power System Multimeter, Industrial Electrical Work Multimeter
High Voltage Digital Multimeter KEPLER Model K8002A HVDM for Solar Power System
KEPLER K8002A HVDM Digital Multimeter for Solar Power System is a digital electrical measuring instrument designed for electrical system inspection and solar power systems (Solar PV Systems). It supports the measurement of up to 1500V DC voltage for general models, and 1000V DC voltage for CE models, as well as up to 750V AC voltage.
The meter features a 6000 Counts LCD display with Data Hold and Auto Power Off functions. It can measure DC/AC voltage, µA/mA current ranges, resistance, capacitance, frequency, diode testing, and circuit continuity checks. Suitable for electrical system inspection and maintenance work.
General Features
Brand: KEPLER
Model: K8002A HVDM
Type: High Voltage Digital Multimeter
Usage: Electrical systems and Solar PV Systems
Display Type: LCD 6000 Counts
Degree of Protection: IP65
Functions: Data Hold and Auto Power Off
Magnet Mounting: Built-in magnet for mounting (K8002A)
Dimensions: 221 x 110 x 57 mm
Total Weight with Battery: Approximately 513 g
Measurement Ranges and Accuracy
1. AC Voltage (AC Voltage)
Range: 600mV / 6V / 60V / 600V / 750V
Accuracy: ±(1.0%rdg+5dgt)
Input Impedance: 10MΩ
2. DC Voltage (DC Voltage)
Range: 600mV / 6V / 60V / 600V
Highest Voltage Range: 1000V for CE / 1500V for general
Check AC/DC voltage in industrial electrical systems
Measure current ranges of µA and mA
Test resistance and continuity of wires
Test diodes and check capacitance of electronic devices
Use for inspection and maintenance of electrical systems by personnel knowledgeable about electrical safety
Limits and Considerations
Highest DC voltage range is 1000V for CE model and 1500V for standard models, must verify actual model before use
CAT III 1000V and CAT IV 600V safety ratings do not mean that 1500V can be measured in all circuit types
Current measurement supports highest range of 600mA as per spec table, not for high ampere level measurements
Must check voltage rating of test leads and accessories before use with high voltage systems
Must follow manual and safety requirements when measuring Solar PV systems
Note: Information referenced from SCMA General Catalog Vol.5 Model K8002A HVDM, must verify sub-model and appropriate voltage ratings for actual usage before ordering
We use cookies to make the site work properly, to understand how it is used, and to show content that is relevant to you. You choose which types to allow; strictly necessary cookies are always on. Privacy Policy