KEPLER K2000 UO 200A Micro Ohm Meter is a digital low resistance meter (Digital Micro Ohm Meter) designed for measuring micro-ohm level resistances. It supports up to 200A test current and has a measurement resolution of 0.1 µΩ, making it suitable for high precision low resistance testing.
The device weighs approximately 1.7 kg with an internal lithium battery, allowing it to be used in testing areas without the need for continuous external power supply. It supports selection of test currents and measurement ranges according to job requirements, facilitating electrical system and industrial equipment inspection.
Features and Technical Specifications
Brand: KEPLER
Model: K2000 UO
Type of Product: 200A Micro Ohm Meter
Metering Mode: Digital Micro Ohm Measurement
Maximum Test Current: 200A
Continuous 200A Test Current Duration: Up to 60 seconds
Resistance Measuring Range: 0.1 µΩ to 20 mΩ as per the device specifications
Accuracy: ±(reading × 0.5% + 1 µΩ)
Measurement Resolution: 0.1 µΩ
Test Power Supply: Constant Current, Limit Voltage approximately 2V
Test Duration: 10-60 seconds adjustable
Battery: Lithium Battery 9Ah
Number of Tests: Over 500 times when fully charged and using Fast Measurement mode
Requirement for Test Lead Resistance: Less than 8 mΩ
Device Weight: Approximately 1.7 kg
Resistance Measuring Range (Measuring Range)
The measurement range table according to the test current levels specified in the catalog
Test Current
Resistance Measuring Range
200A
0-1000 µΩ
150A
0-2000 µΩ
100A
0-5000 µΩ
80A
0-8 mΩ
50A
0-10 mΩ
30A
0-20 mΩ
Test Current System
The device supports testing with a maximum current of 200A, allowing the selection of test currents suitable for the desired resistance range. It features a constant current (Constant Current) system and sets a voltage limit approximately at 2V as per the catalog data.
For a 200A test current, it can provide continuous current up to 60 seconds, with test duration options ranging from 10 to 60 seconds.
Battery System and Usage
Uses an internal lithium battery with a capacity of 9Ah
Sustains over 500 tests per full charge under Fast Measurement Mode conditions
Weighs approximately 1.7 kg, making it convenient for movement within testing areas
Supports selection of measurement ranges according to test current
Examples and Usage Guidelines
Metering the low resistance of electrical connection points
Adapting to check contact resistance of electrical equipment
Checking the resistance of busbar connections (Busbar Connections)
Inspecting the resistance of wire joints and high current connection points
Applying for testing electrical equipment in maintenance and industrial power system inspection work
Limits and Considerations
Select test currents appropriately based on the tested resistance values and devices
The use of a 200A test current supports continuous operation up to 60 seconds
The measurable resistance range depends on the selected test current level
Test leads must meet the specified requirements, with a value less than 8 mΩ
Check battery condition and power levels before starting tests
Use in circuits that have been disconnected from power sources and follow safety procedures as outlined
Review test lead details and accessories included with the device prior to purchase
Note: Technical data referenced from SCMA General Catalog Vol.5, Model K2000 UO. Test current specifications and measurement ranges should be verified against the user manual before actual use.
We use cookies to make the site work properly, to understand how it is used, and to show content that is relevant to you. You choose which types to allow; strictly necessary cookies are always on. Privacy Policy