MDO-2102EX GW instek Digital Storage Oscilloscope Mixed-signal Oscilloscopes

Details of MDO-2102EX GW INSTEK Digital Storage Oscilloscope (Oscilloscope) Mixed-Signal Oscilloscopes

MDO-2102EX GW INSTEK Digital Storage Oscilloscope (Oscilloscope) Mixed-signal Oscilloscopes Bandwidth 70/100/200MHz Supports 2ch or 4ch, vertical resolution 8-bit adjustable scale from 1mV~10V/div with time base 1ns/div~100s/div (1-2-5 increments) and DC Gain accuracy ±3% when selecting 2mV/div or higher. The unit comes with an integrated Spectrum Analyzer covering a frequency range of 1Hz~500MHz, reference level -50 to +40 dBm, and supports units such as dBv RMS/Linear RMS/dBm. It also includes a Function Generator at 25MHz with 14-bit resolution, sample rate 200MSa/s, supporting various waveforms (Sine/Square/Pulse/Ramp/Noise etc.), output range of 20mVpp~5Vpp (HighZ) or 10mVpp~2.5Vpp (50Ω). The MDO-2000EX series includes a DMM with 5,000 counts (measuring V/AC-DC/current/resistance) and an internal Power Supply providing up to 1A at CH1 & CH2 for voltages of 1.0~5.0V.

Features of MDO-2102EX GW INSTEK Digital Storage Oscilloscope (Oscilloscope) Mixed-Signal Oscilloscopes

• Frequency Range : 70MHz/100MHz/200MHz, 2ch or 4ch
• Vertical Sensitivity Resolution: 8bit : 1mv~10V/div
• DC Gain Accuracy : ±(3%)when 2mV/div or greater is selected
• Horizontal Time base : 1ns/div~100s/div (1-2-5 increments)
  Spectrum Analyzer Function Frequency Range: 1Hz~500MHz (Max.)
• Reference level : -50dBm to +40dBm in steps of 5dBm
• Vertical units : dBv RMS; Linear RMS; dBm
• Noise level : 1V/div <-50dBm, Avg : 16
  Generator Function Frequency Generation: 25MHz, 14bit, Sample Rate: 200Msa/s
• Waveforms : Sine, Square, Pulse, Ramp, DC, Noise, Sinc, Gaussian, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac
• Output Range : 20mVpp to 5Vpp, HighZ; 10mVpp to 2.5Vpp, 50Ω ; ±2% (1kHz)
  DMM Function (MDO-2000EX only): 5,000 counts
• Parameter : VDC; 1000V ±(0.1%rdg+5dgt), VAC;700V ±(1.5%rdg+15dgt), Current; 10ADC ±(0.5%rdg+0.05mA) / AC ±(1.5%rdg+0.05mA), Resistant: 5MΩ ±0.5%rdg+5dgt).
  Power Supply Function (MDO-2000EX only)
• Output channel: CH1 & CH2
• Voltage: 1.0 ~ 5.0V ±3%, Current: 1 Amp. (Max)