CP 733 CPU Module SIGMATEK

SIGMATEK CPU Module Model CP 733 (Industrial CPU Module)

SIGMATEK CP 733 is a CPU processing module for industrial automatic control systems, using an Intel Atom Dual Core CPU processor, and supports operation with I/O modules and communication devices in machine control systems.

CP 733 supports connecting up to 64 modules, both Digital Module and Analog Module, to accommodate signal receiving and transmitting system design according to the requirements of the machine and production process.

In terms of communication, it has 1 Ethernet port, 1 VARAN Out port, 1 EtherCAT Driver Controller port, 1 CAN port, and 1 USB Device port, along with an internal Real Time Clock (RTC).

The device uses 24 VDC voltage and has dimensions of 40.2 x 147.7 x 193.6 mm (width x height x depth), suitable for designing and installing in automatic control systems and industrial machines with communication interfaces according to specifications.

General Features (Features)

• Brand SIGMATEK
• Model CP 733
• CPU module for industrial automatic control systems
• Uses Intel Atom Dual Core CPU processor
• Supports up to 64 expansion modules
• Supports Digital Module and Analog Module
• Uses 24 VDC voltage
• Has 1 Ethernet port
• Has 1 VARAN Out port
• Has 1 EtherCAT Driver Controller port
• Has 1 USB Device port
• Has 1 CAN port
• Has internal Real Time Clock (RTC)
• Dimensions: 40.2 x 147.7 x 193.6 mm
• Suitable for machine control and Factory Automation systems

Technical Specifications (Technical Specifications)

Specifications	Details
Brand	SIGMATEK
Model	CP 733
Product Type	Industrial CPU Module
Processor	Intel Atom Dual Core CPU
Maximum Expansion Modules	64 Modules
Expansion Module Types	Digital Module / Analog Module
Supply Voltage	24 VDC
Ethernet Interface	1 Port (Industrial Mini I/O Connector)
VARAN Out	1 Port (Industrial Mini I/O Connector)
EtherCAT Driver Controller	1 Port
USB Device	1 Port
CAN Interface	1 Port
RTC	Built-in Real Time Clock
Width	40.2 mm
Height	147.7 mm
Depth	193.6 mm
Dimensions (W x H x D)	40.2 x 147.7 x 193.6 mm
Processor Clock Speed	Not Specified in Catalog
Operating Temperature	Not Specified in Catalog
Programming Software	To Be Confirmed According to System Requirements
Catalog Reference	SCMA General Catalog Vol.5, D1-02

Note: The catalog specifies the Intel Atom Dual Core CPU processor unit but does not specify the processing speed in MHz or GHz, and also does not specify memory details and operating temperature. Therefore, it is necessary to check the specific technical documents before determining the project specifications.

Intel Atom Dual Core CPU Processor

CP 733 uses the Intel Atom Dual Core CPU processor for command processing in the automatic control system, and can be applied to machine control work that requires connecting I/O modules and industrial networks.

The actual performance depends on the control program, communication data volume, number of modules, and system time requirements. It is recommended to check the Cycle Time data and additional processor details when designing work requiring specific performance.

Supports up to 64 expansion modules

CP 733 supports connecting up to 64 expansion modules, both Digital and Analog types, allowing the control system to be designed to match the number of signal input and output points of the machine.

Selecting an expansion module must check compatibility with the CPU model CP 733, including power supply requirements, connectivity, and system limitations designed.

Communication System (Communication Interfaces)

Interface	Quantity	Description
Ethernet	1 Port	Industrial Mini I/O Connector
VARAN Out	1 Port	Industrial Mini I/O Connector
EtherCAT Driver Controller	1 Port	EtherCAT Drive Communication Interface
CAN	1 Port	CAN Communication Interface
USB Device	1 Port	USB Device Connection

The communication interface of CP 733 supports the design of systems with various types of industrial equipment, but compatibility of the protocol, connectors, and wiring format must be checked from the manufacturer's manual before actual use.

EtherCAT Driver Controller System

CP 733 has 1 port of EtherCAT Driver Controller according to the catalog data, for designing communication with drive devices or EtherCAT devices that support according to system requirements.

Usage should check compatibility of the destination device, system settings, and supported functions from the specific model technical documents. Having an EtherCAT Driver Controller does not automatically confirm support for all functions of the EtherCAT device.

VARAN System

The CP 733 CPU module has 1 port of VARAN Out, which can be used to connect systems or modules that support the VARAN network according to the system control design.

Before use, check the type of cable, connectors, and communication requirements from the manufacturer's manual.

CAN Communication System

CP 733 has 1 port of CAN for connecting supported devices, but must check the protocol, communication speed, and additional network configuration, as the catalog data does not specify these details.

Real Time Clock (RTC)

CP 733 has an internal RTC to support systems that require date and time data under the capabilities of the software and control program.

24 VDC Power Supply System

CP 733 uses 24 VDC voltage, and it is recommended to select a power supply that meets the requirements of the CPU and connected modules, including providing an electrical protection system according to the manufacturer's manual

The catalog does not specify that the Power Supply model PS101 must be used with CP 733, so it should not automatically apply the conditions of other CPU models

Product Size (Mechanical Dimensions)

Dimension	Size
Width	40.2 mm
Height	147.7 mm
Depth	193.6 mm

The installation design should allow space for connectors, wiring, communication cables, expansion modules, and cooling, as well as check the installation direction according to the product manual

Application Examples (Applications)

• Automatic machine control system
• Industrial factory production process control system
• Factory Automation system
• Control system requiring connection to Digital I/O and Analog I/O
• Machinery system using VARAN communication devices
• Control system requiring EtherCAT Driver Controller
• System connecting devices through Ethernet and CAN
• Specialized machine control system design

Guidelines for Selecting SIGMATEK CP 733

• Check the processing requirements of the machine
• Check the number of Digital I/O and Analog I/O required for use
• Check the maximum number of expansion modules, up to 64 modules
• Check the compatibility of expansion modules with CP 733
• Check the use of Ethernet, VARAN, CAN, and EtherCAT
• Check the requirements of the 24 VDC power supply system
• Check the installation space inside the control cabinet
• Check the software and tools for program development
• Check the manufacturer's technical manual before designing the actual system

Installation Precautions (Installation Precautions)

• Use 24 VDC voltage according to the device specifications
• Check the connectors and power supply system before starting use
• Install in an environment suitable for industrial electronic devices
• Check the grounding and signal interference protection according to the manufacturer's manual
• Use appropriate wires and connectors for the interface

• Do not plug in or remove modules while power is on, unless the manufacturer's manual specifies that it is supported
• Provide adequate ventilation and maintenance space as required
• Check the settings and test the system before putting the machine into actual use

Important Notes

• Product is [SIGMATEK] CPU Module model CP 733
• Uses Intel Atom Dual Core CPU according to catalog data
• Supports up to 64 expansion modules
• Uses 24 VDC voltage
• Has 1 Ethernet port and 1 VARAN Out port
• Has 1 EtherCAT Driver Controller port
• Has 1 CAN port and 1 USB Device port
• Has internal RTC
• Size: 40.2 x 147.7 x 193.6 mm
• Do not use the specifications of CP 731, CP 312, or CP 313 as a substitute for CP 733
• Check the list of delivered equipment and usage requirements before ordering