EMAS CM200DK Push Button Momentary Red 1NC, Size: 22 mm (CM Series Push Button Momentary)
EMAS CM200DK is an electrical control push button momentary switch in the CM Series Metal family for installation on electrical control cabinets and machine control panels. It features a red flush type button with a spring return mechanism.
The CM200DK model has one set of Normally Closed (1NC) contacts, which close the circuit in the normal state. When the button is pressed, it opens the circuit, and when released, it automatically returns to closing the circuit. Suitable for use as a STOP button or for sending control commands to PLCs, Relays, and machine control systems.
The housing is made of die-cast metal with an anti-corrosion coating, designed for installation in 22 mm diameter holes and has an IP65 protection level at the front when properly installed.
Features
- EMAS CM200DK Push Button Switch
- In the CM Series Metal family
- Momentary or Spring Return type
- Red button (Red)
- Flush Type button face
- 1NC contacts (Normally Closed)
- Hole size Ø22 mm
- Contact rating 4 A at 230 VAC in AC-15 category
- Die-cast metal housing, suitable for industrial environments
- Contact block material PA6.6, UL94 V0 rated
- Contacts made of AgNi material
- IP65 protection level from the front
- Suitable for electrical control cabinets and machine control panels
- No built-in illumination (Non-Illuminated)
Technical Specifications
| Specifications | Details |
| Brand | EMAS |
| Model | CM200DK |
| Series | CM Series Metal |
| Product Type | Push Button Momentary |
| Operating Mechanism | Spring Return |
| Actuator Type | Flush |
| Button Color | Red |
| Contact Configuration | 1NC |
| Mounting Hole Diameter | 22 mm |
| Rated Operational Current (Ie) | 4 A at 230 VAC |
| Utilization Category | AC-15 |
| Rated Insulation Voltage (Ui) | 300 V |
| Rated Impulse Withstand Voltage (Uimp) | 2.5 kV |
| Contact Material | AgNi |
| Contact Block Material | PA6.6 V0 |
| Protection Degree | IP65 (Front Side) |
| Operating Temperature | -15 to +65 °C |
| Mechanical Life | Minimum 500,000 Operations |
| Electrical Life | Minimum 100,000 Operations |
| Mechanical Operating Frequency | 3,000 Operations/Hour |
| Electrical Operating Frequency | 1,200 Operations/Hour |
| Insulation Resistance | Minimum 10 MΩ at 500 VDC |
| Dielectric Strength (Body-Contact) | 2500 VAC |
| Dielectric Strength (Contact-Contact) | 1500 VAC |
| Pollution Degree | 3 |
| Cable Section | 1.5–2.5 mm² |
| Terminal Screw Torque | 1.5 Nm |
| Short Circuit Breaking Capacity (Ics) | 1 kA (Manufacturer Specification) |
| Applicable Standard | IEC 60947-5-1 / UL 508 |
| Catalog Reference | SCMA General Catalog Vol.5, D7-05 |
Operating Principle of Momentary Push Button (Spring Return Operation)
EMAS CM200DK uses a spring-return mechanism. When there is no pressure applied, the Normally Closed (NC) contact remains in a closed circuit state. Upon pressing the button, the contact opens the circuit, and when the button is released, the spring mechanism returns the contact to its closed circuit position again.
It is suitable for sending momentary stop commands to control circuits, where any prolonged stopping or restarting must follow system control logic and machine safety requirements.
1NC (Normally Closed Contact)
The CM200DK has 1 set of 1NC contacts. It is ideal for use in control circuits that require continuity under normal conditions and circuit opening upon button press.
It features a rated current capacity of 4 A at 230 VAC for Utilization Category AC-15, which pertains to control circuits rather than direct motor power supply ratings.
Metal Construction CM Series (Metal Housing)
The EMAS CM Series Metal housing is made from cast metal with a surface coating to enhance environmental durability. It is designed for use on electrical control panels and industrial machinery.
Contact Block is manufactured from PA6.6 material rated V0, and uses AgNi contacts to support operation in control circuits as per specified ratings.
Panel Mounting (Installation)
The CM200DK is designed for installation on Ø22 mm mounting holes. It can be used with front panel electrical control cabinets, Operator Control Panels, or control boxes that have appropriately sized mounting holes.
Installation should check the panel thickness, rear mounting distance, and wiring space from the manufacturer's technical drawing before assembly and use.
IP65 Protection Degree (Protection Level)
The front has an IP65 protection level, which protects against dust and water jets as per standard conditions when properly assembled and installed.
The rear of the button press and wiring terminals must be protected by a control cabinet or appropriate enclosure since the front IP65 rating does not mean that the rear wiring terminals can directly contact water.
Stop Control Application (Usage as Stop Button)
The red CM200DK pushbutton can be used as a STOP button to send stop commands for machine operation through PLC, Relay, or appropriately designed control circuits.
Caution: CM200DK is a general Momentary Push Button, not an Emergency Stop Locking Device. It should not be used as a substitute for emergency stop and safety systems that require specific certification.
Applications
- Machinery control panel STOP button
- Sending signals to PLC Digital Input
- Controlling Relay and Contactor in control circuits
- Temporary system shutdown of automatic systems
- Operator Control Station control button
- Industrial electrical cabinets and control panels
- Factory Automation Systems
- Industrial Machine Control Systems
Installation Precautions
- Disconnect power before installation or circuit modification
- Check the mounting hole Ø22 mm size before installation
- Ensure that the 1NC contact matches the circuit design
- Select wire gauge suitable for the rating and manufacturer's specifications
- Tighten terminal screws with a torque of 1.5 Nm as per Datasheet
- Check control circuit voltage and current ratings
- Avoid moisture, dust, and contact with rear terminals appropriately
- Do not use as an Emergency Stop device requiring locking function and safety certification
- Test button reset position and contact operation before use
Important Notes Before Purchase
- Product is EMAS model CM200DK
- Red Momentary Spring Return Push Button
- Flush Type faceplate
- 1NC contact
- Mounting hole Ø22 mm
- No LED or internal lighting
- Front IP65 protection level
- If a red LED model is required, consider CM260DK
- If 2NC contacts are needed, consider CM202DK
- Check size and accessories before ordering
